Hotchkis Sport Anti Roll Bars for E90 E92 335i except xi Ready to ship!

[HP Autowerks]

The Hotchkis Anti Roll or Sway Bars are in stock and ready to ship!

Retail is $495.95

Special is $450 with FREE shipping to the 48 states!


Application:

2006 – 2008 BMW E90 Sedan & E92 Coupe ( xi models excluded)

Enhance the cornering performance of your BMW with a set of Hotchkis Sport Suspension sport sway bars. Our 335I sport sway bar package increases front/rear roll stiffness giving the car crisp, quick turn-in response and balanced handling. As delivered the 335I has excessive under steer and limited roll control. Sport sway bars give the driver the ability to rotate the car on corner entry and steer with the throttle when necessary. The dreaded under steer is eliminated and the handling becomes comfortably neutral with added traction during cornering. Hotchkis Sport Suspension sway bars feature a durable powder coat finish, greaseable bushings, and adjustable Heim joint end links.


Features:

Front sway bar-lightweight, durable 1 1/4” (32mm) tubular steel (95% stiffer than stock)
Rear sway bar-lightweight, durable 5/8” (16mm) tubular steel (105% stiffer than stock)
Precision adjustable front end links w quiet operating heavy duty ball joints.
Precision adjustable rear end links w quiet operating heavy duty ball joints and high articulation rod ends.
Greasable polyurethane bushings and heavy duty mounts included.
Autocross & track tuned for maximum performance improvement.
Finished in durable gloss gray powder coat.

Benefits:

Increased Traction.
Reduced Body Roll
Increased Vehicle Stability
Crisper Cornering
Easy Installation

[PAKMAN]

have you had this on your car? if so please gime a personal opinion. how good are they? any relations to titanmotorsport cause it seems like you guys have the same pricing? what makes HP better than titan cause the prices seem the same. im not bashing. just curious.

[HP Autowerks]

have you had this on your car? if so please gime a personal opinion. how good are they? any relations to titanmotorsport cause it seems like you guys have the same pricing? what makes HP better than titan cause the prices seem the same. im not bashing. just curious.

We are selling the same product from Hotchkis. We are located in California and can provide tech support if needed.

Every car will respond differently to anti roll bars and each person has his/her preference on handling.

The anti roll bar is on our project 335i with TC Kline Coil-over suspension with 400 lbs front and 500 lbs rear springs, camber plates and a Quaife differentail. Understeer and body-roll is reduced, and vehicle is more responsive. Basically, the same benefits Hotchkis has mentioned.

Harold

[PAKMAN]

i love your project car! i thought these were called hotchicks sways bars. :lol:

[hunter399]

have you had this on your car? if so please gime a personal opinion. how good are they? any relations to titanmotorsport cause it seems like you guys have the same pricing? what makes HP better than titan cause the prices seem the same. im not bashing. just curious.

I dont know about Titan, but I do know Harold and HP offer fantastic service and great customer support

I highly recommend doing business with them

[Crimson92]

oooooo...me want

[HP Autowerks]

i love your project car! i thought these were called hotchicks sways bars. :lol:


Please allow me to correct my spelling! :D

[HP Autowerks]

oooooo...me want

They are in stock ready to ship!

[scalbert]

What is involved with the installation? I have heard of varying difficulties including dropping the rear subframe. Thanks...

[HP Autowerks]

What is involved with the installation? I have heard of varying difficulties including dropping the rear subframe. Thanks...


The front bar is easy. The rear will require the drop of the rear subframe.

Harold

[scalbert]

Thanks, I haven't climbed under the rear of the car (been under the front more than a few times :) ) to look at what is involved. Any hints or tips and does the kit include any instructions as they are not listed on Hotchkis's website?

Thanks again...

[T7R_Sky]

Just wondering... how do these compare with the H&R Sway Bars that were released a long time ago? :confused2

[HP Autowerks]

Just wondering... how do these compare with the H&R Sway Bars that were released a long time ago? :confused2


The Hotchkis anti-roll bars are hollow, so if weight is a concern they are lighter.

The bushings have zerk fitting for re-lubrication, so you dont haveto remore anything when the bushings get noisy.

[stressdoc]

Just wondering... how do these compare with the H&R Sway Bars that were released a long time ago? :confused2

The balance btw front and rear sway resistance is different. The H&R rear bar is big, resulting in inside wheel lift and loss of traction. The Hotchkis system, particularly in combination with the Bilstein PSS9/10 coilovers and a LSD, will provide better control, traction, and turn-in. Camber plates and strut braces complete the picture (assuming you already have forged lightweight wheels and proper non-rft tires)...

[stressdoc]

Harold I have not seen stats on the weight of the Hotchkis vs. stock bars. Any chance you guys could weigh them?
Thanks!

[HP Autowerks]

Harold I have not seen stats on the weight of the Hotchkis vs. stock bars. Any chance you guys could weigh them?
Thanks!

I'll see what I can do.

Harold

[PAKMAN]

pm please!

[HP Autowerks]

pm please!

Replied

[hov333]

anything to expect for xi coupe in the near future?? :(

[HP Autowerks]

anything to expect for xi coupe in the near future?? :(


Perhaps. I will check with Hotchkis.

[stressdoc]

I am psyched about these, they look great. Waiting on someone to test them out for us!

[second_2_nun]

please pm me price shipped to 92833 thanks

[HP Autowerks]

PM replied!

[HP Autowerks]

Bump this thread.

[HP Autowerks]

We have these in stock ready to ship!

[stressdoc]

Do you have the Bilstein PSS10s that are matched with the
Hotchkis sways for sale too?

[HP Autowerks]

Do you have the Bilstein PSS10s that are matched with the
Hotchkis sways for sale too?

Answered on the thread! :D

[hunter399]

when is the chassis brace coming out?

[MpoweredM]

How much lower will these hang underneath the car?

Thanks

[HP Autowerks]

How much lower will these hang underneath the car?

Thanks

You won't even see them! The front bar is covered by the engine tray and mounts in the stock location. The rear is above the final drive unit. Ground clearance is the same as stock.

[MpoweredM]

^Good to know for use slammed cars! THanks.

[HP Autowerks]

We have these in stock and ready to ship!

[PAKMAN]

shipped to me 94539.

[HP Autowerks]

Bump!

[HP Autowerks]

We have these in stock ready to ship!

And we are doing test fitment for E9X M3 next week!

[HP Autowerks]

Bump!

[HP Autowerks]

We just received a few more of these anti-roll bar kits!

Price is $450 with Free shipping to the 48 States.

That is not all!

FREE!!! We will throw in 2 quarts of Redline D4ATF(for your 6-spd trans) or 2 quarts of Redline 75w90(for your rearend) and your choice of either two SI-2 fuel injector cleaners or one Redline Water Wetter cooling system additive free of charge with free shipping as well to the 48 States! FREE!!!

That is a $45+ value!

Harold

[Tranzporter]

How much for the rear sway bar only, or do you guys only sell them in sets?

[HP Autowerks]

How much for the rear sway bar only, or do you guys only sell them in sets?

PM you.

[Mr. 5]

PM sent!:thumbsup:

How much for the rear sway bar only, or do you guys only sell them in sets?

Maybe I can take the front and you can take the rear. :)

[HP Autowerks]

PM sent!:thumbsup:



Maybe I can take the front and you can take the rear. :)

PM replied!

[stressdoc]

Bump for weight data comparing these to the OEM ZSP sway bars...

[HP Autowerks]

Bump for weight data comparing these to the OEM ZSP sway bars...

The OEM ZSP front anti-roll bar is approx. 7.5 lbs. The Hotchis unit is approx. 10 lbs. And to our surprise, the H&R front bar is 13 lbs!!!!

[HP Autowerks]

Bump this one!

[HP Autowerks]

The OEM ZSP front anti-roll bar is approx. 7.5 lbs. The Hotchis unit is approx. 10 lbs. And to our surprise, the H&R front bar is 13 lbs!!!!


Get these light weight anti roll bars for your E9X BMW now!

[stressdoc]

Hotchkis and the concept of a big fat front sway got a big approval from Jim Rowe.

Thanks for weighing the bars! Community service Karma...