I have a spoiler so I plan on doing the trunk in 3 pieces. Seam at the edge of the trunk, seam where the crease is near the lights, and 3rd seam under the trunk release handle area (I don't feel comfortable mounting the spoiler to vinyl). The rear bumper u-shaped area I might attempt with the one piece and if it fails, do it with 2.
I also have a lot of rock chips on my front bumper, so I'm planning on filling it and sanding them smooth so the vinyl has a nice finish in the front.
If everything goes smooth, this vinyl wrap should cost me less than $200. Which would have been cheaper than repainting my front bumper.
Thanks for the informative post and motivation!
|