Quote:
Originally Posted by Kubricks
Just check the parts no. on the ESS provided Bosch injectors, they are spec for E9X M3.
|
I just looked them up today as well, not sure how much better the s65 injector will do over the stock one. I had a stock n52 injector flow tested and it came out to be around 31lbs @ 73.5lbs of rail pressure. And from what I have been told the stock s65 injector is only a 36lb injector @ 43lbs of pressure and a 45.6 @ 73.5, so that would only allow for a max power output on a 6 cylinder to be 400 crank or 340 wheel hp @ 80% duty cycle.
With a smaller pulley making 9lbs of boost, header and meth injection I can see close to 400rwhp out of this kit...but first thing first is to do a baseline blower dyno run
