View Single Post
      09-11-2019, 05:08 PM   #1
330istocknot
First Lieutenant
186
Rep
394
Posts

Drives: 330chino
Join Date: Mar 2016
Location: chino

iTrader: (0)

Reverse camera OEM style retrofit for $199 shipped - DIY Details

Hello,

I recently purchased a f30 328I Sportline without reverse camera.

After doing some research i found a company that has a retrofit for $199. A bit skeptical but i gave it a go, as i have extremely tinted windows and could not see behind me.


This is the kit:




The kit took me about 3 hours to install, and i have to say, i am extrwemly happy.

it comes with a reverse camera that clicks in by the hood latch, looks OEM as heck!



UPDATE: Video of how the rear view camera works in daylight.



Here is a video that shows how bright it is at night:





The reverse camera works with the stock idrive, and also has dynamic parking lines when you move steering wheel.

Here is the link: http://www.carnaviplayer.com/rearvie...-series-p-1222

If you do buy it make sure you use coupon code:free-shipping for 3 day free DHL shipping to USA.

If anyone is interested, i can make a tutorial of it, but it was well worth it!

****BEFORE YOU BUYN READ THIS****


You have to select which version you have: CIC, NBT or EVO.

**IF YOU HAVE CIC YOU WILL HAVE TO MANUALLY CHECK THE PINS TO SE IF ITS A 4PIN OR 6 PIN CONNECTOR.**

Go on your main menu, and compare the red highlight, one is more red, the other is more orange. Both EVO version apply to just evo.



For example, my car has a 6.5 inch screen and i had the NBT menu. so i chose the following:



This is important, as the connector for the screen is different.


HERE IS A VIDEO FROM CARNAVI SHOWING HOW TO REMOVE THE AIR VENTS AND CLIMATE CONTROL TO GET ACCESS TO THE MODULES:





THIS VIDEO SHOWS THE ORDER AND PLACEMENT OF EACH CABLE.





DISCLAIMER: DO NOT FORGET TO REMOVE THE FIBER OPTIC CABLES FROM YOUR ORIGINAL HARNESS AND INSTALL ON THE NEW HARNESS LIKE THIS:



***TROUBLESHOOTING***


If your guidelines are not centered, here is how to adjust alignment"

Quote:
Originally Posted by OC_F32 View Post
Yes. The guide lines can be moved pretty easily.

-Put the car in reverse
-hold down iDrive knob
-turn knob to move the lines closer/further away from car
-push and hold knob left to right to move lines from one side to the other

Last edited by 330istocknot; 09-27-2019 at 11:35 AM..
Appreciate 9
jh_f301308.00
DarkF3054.00
sthor1022.50
Urbz8.00
EDWYER1678.50
WillSkill172.00
OC_F32118.50