Quote:
Originally Posted by SuperLomi
Adding some recent info here, to keep it all together. Will add more once install is done.
So I received a pair of the camber bushings recently and will be installing this weekend.
The first thing I noticed was the fitment of the outer “washers” doesn’t seem to have been fixed as Farkle thought in his video.
You can see in the images that the profile of the bushing vs the profile of the washer doesn’t match.
This causes the washers to contact the corners of the bushing, and keeps them from laying flush with the inner cylinder. I used some white paint to visualize where they contact (2nd image).
It sounds like Farkle ground the top of the bushing down. I am currently planning to try just adding a chamfer to the corner of the bushing to get them to fit correctly.
|
Hopefully rounding the corners is all you need to do. I needed to grind the whole thing down so the assembly would fit between the ears of the subframe.