Quote:
Originally Posted by mig2830
First, if you have E-sys programme, make a TAL calculation with 3AG added to the VO. That will show you what type of reverse cam you will need.
If it is similar to F30, you will come up with ICAM-and that is fairly simple to install.
you will need to draw 2 wires for power supply, positive is from the rear fuse box, ground any ground terminal. Then a twisted pair from camera to FEM and a shielded two wire cable from the camera to the HU-that is the "picture"
You need the camera itself and a new trunk handle with space for the camera.
Then VO coding of the camera, the FEM and the HU
|
Will I need to get power from the rear fuse box, or can I tap into an existing line that provides power such as K-CAN2? Also where should the ICAM module be mounted, from research I've found that it is mounted under the plastic trim near the steering wheel?