Bimmerpost,
We here at WheelSTO are proud to announce the release of the new WORK Wheels Meister S1-R & M1-R for BMW 5x120 PCD. You might be familiar with the original, cult classic Work Meister S1. The original S1's were spun cast barrel with a cast face available in riveted 3 piece or the 2 piece construction.
WORK Wheels have decided to cut the weight down and make the Meister into a competitive 2 piece track wheel.
The new WORK Meister S1 R/M1 R was born.
WORK Meister R series uses a two piece construction wheel. They have modernized the center disk to a more updated look while saving as much weight as possible without sacrificing the wheel strength while utilizing their patented low pressure cast center disk with a spun forged step rim barrel.
Sizing:
18" Sizing only at the moment
Sizing ranging from 18 x 8.5 ~ 11.5 wide. Offset increments in (1mm) for a precise specification
Construction:
Low pressure cast center disk with a spun Forged step rim barrel.
Disk Type:
(A) Disk f
or standard, larger factory calipers.
(R) Disk
for Big brake clearance.
(O) Disk
for Maximum lip, less brake clearance or smaller brakes.
Weights:
18 x 9 ~
approximately 22 lbs
18 x 10 ~
approximately 23 lbs
Colors/Finish available:
Matte Bronze Anodized Barrel - S1R
Feinheit Silver II - S1R
Matte Black (MBL) - S1R
Bright Buff Finish (BBF) - S1R
Matte Bronze Anodized Barrel - M1R
Feinheit Silver II - M1R
Matte Black (MBL) - M1R
Platinum Gold (PG) - M1R