Quote:
|
Originally Posted by Mik325tds
Quote:
Originally Posted by Sensible_
Good news. Glad it's sorted!
Hopefully more will follow. I always refuse to accept 'bricked module'. All software problems can be solved. 
Which EEPROM flash did you use to write? Have you now reflashed with winkfp? |
I used the one closest to my original SW/HW of the module:
FRM3 LED XE 61359241008 hw 06 sw 125000.rar
After just updating the EEprom the module gave me problems again after I took it out again to read the EEprom after updating the VIN and FA. Strangely, now the car warned me that ignition was on??? It also turned on the headlights again and didn't communicate anymore.
I then also flashed the P-flash and updated EEprom again to have a matching set which did the trick.
I have not been able to update to the latest SW with WinKFP yet. It seems I'm missing the daten file of the original SW 9240529. WinKFP will not reflash, even in Expert mode. It says incompatible HW version. |
Yes, EEPROM won't match your HW version exactly so you must sift through the daten dat files to find a compatible zb number. You will find one I'm sure, then if winkfp won't flash use NFS Emergency Flash, all be ok.