|
Do you have a tuning cable?
I have found that INPA can electronically reinitialize and then roll up the window from within the software.
If you let the window all the way down again, you'll have the same problem again.
To prevent this, stop the window about an inch before it goes all the way down. It won't get stuck.
If your window is down and you need it up NOW...
Take a pair of needle nose pliers and grab the window in the door. Pick a point close toward the b-pillar end
of the door. Pull the window upward gently and then use the switch to get it to raise up at the same time.
#works like a charm
|