|
After I installed mine, I didn't code my car for it until about 6 months later. The only things that didn't work were the hood contact switch (the alarm wouldn't activate if the hood was opened) and the panic alarm (holding the trunk unlock button down for 5s had no effect). Everything else worked (doors, trunk, chirp @ lock & unlock). The interior motion/tilt sensor and flashing LED on the mirror also worked. If you decide to code it and have the cable for the OBD port, its actually really easy. The official instructions say to use Progman, but you can actually do it with NCSExpert in about 30 seconds.
|