Quote:
Originally Posted by EezyBeezy
Just did this on my '18 F80 through expert mode using Bimmercode and worked perfectly. Those (3) little amber LEDs just looked out of place.
For those who have "Front Light Electronics Left" and "Front Light Electronics Right" control units here is exactly what I did.
Front Light Electronics Left
- Navigate to Front Light Electronics Left
- Click on Expert mode
- Click on 3006 LED1
- Click on LM_ID_LT4
- Change to 02_VALUE / 0x00
- Go back to the 3006 LED1 page
- Click on LM04_NAME
- Change to 02_VALUE / 0x00
- Back on 3006 LED1 page and click code
Check & verify if value changes worked for the Left headlight. If no-go, revert back. If good, then proceed with the Front Light Electronics Right control unit.
Front Light Electronics Right
- Navigate to Front Light Electronics Right
- Click on Expert mode
- Click on 3006 LED1
- Click on LM_ID_LT4
- Change to 02_VALUE / 0x00
- Go back to the 3006 LED1 page
- Click on LM04_NAME
- Change to 02_VALUE / 0x00
- Back on 3006 LED1 page and click code
Enjoy!
Thanks all to previous posters for cluing me in.
|
I just wanted to chime in and let you guys know that this exact method worked on my '18 F85 X5M. The 2018s have the iDrive updated and BimmerCode did not have easy menus enabled to code off the ambers but this code shared via expert mode worked perfectly. Thanks again!