View Single Post
      02-22-2019, 07:34 AM   #106
Astone22
First Lieutenant
78
Rep
388
Posts

Drives: F30 320 xdrive, f32 428
Join Date: Mar 2017
Location: Stl

iTrader: (1)

Quote:
Originally Posted by cjn View Post
Quote:
Originally Posted by Astone22 View Post
Can anyone confirm this is the correct coding I need using bimmercode? I am just worried I will mess something up in expert mode. But I don't want my lci leds fogs to flicker when on. Thanks for the input

FEM_BODY

3061 NSW_R_KALTUEBERWACHUNG -> nicht_aktiv : LED Foglights front right
3061 NSW_R_WARMUEBERWACHUNG -> nicht_aktiv : LED Foglights front right
3061 NSW_R_IS_LED -> aktiv : LED Foglights front right
3062 MAPPING_ABBIEGEL_R_PWM_LEVEL_1 -> 100% : LED Foglights front right
3061 NSW_R_UE_SPG_SCHUTZ -> dimmed : LED Foglights front right
3063 MAPPING_NEBELSCHW_R_PWM_LEVEL_1 -> 100% : LED Foglights front right

3061 NSW_L_KALTUEBERWACHUNG -> nicht_aktiv : LED Foglights front left
3061 NSW_L_WARMUEBERWACHUNG -> nicht_aktiv : LED Foglights front left
3061 NSW_L_IS_LED -> aktiv : LED Foglights front left
3061 NSW_L_UE_SPG_SCHUTZ -> dimmed : LED Foglights front left
3063 MAPPING_NEBELSCHW_L_PWM_LEVEL_1 -> 100% : LED Foglights front left
3062 MAPPING_ABBIEGEL_L_PWM_LEVEL_1 -> 100% : LED Foglights front left

3062 MAPPING_abbiegel_L_output -> nsw_l : Foglight when turning
3062 Mapping_abbiegel_R_output -> nsw_r : Foglight when turning
3073 KL_ENABLE_RE -> KL_Ein : Foglight when turning
3066 KL_ENABLE_LI -> KL_Ein : Foglight when turning
3073 C_CLC_ENA -> enable : Foglight when turning
3073 C_BLC_ENA -> enable : Foglight when turning

3063 Mapping Nevelschw L Part of WL soft-on nicht_aktiv : Foglight left as welcome
3063 Mapping Nevelschw R Part of WL soft-on nicht_aktiv : Foglight right as welcome
That all looks good, except for one setting. If you have basic headlights, with a height adjustment wheel on the switch panel, you may find as I did that enabling C_BLC_ENA disables the height adjuster. I think this item is only relevant for active headlight installations. I have found that leaving it disabled still allowed the turning function to work.

Just one other point about an error that just gets propagated through all these posts: both the KL_ENABLE items are 3066, NOT 3073.
I have the xenon headlights right now so does this pertain to me?
Appreciate 0