Quote:
Originally Posted by JRocker3
Looking to run the 18" EC-7 on my 18 340i... will be doing ground control camber plates and Bilstein PSS10 at the same time...
Can I run 18x8.5 245/40 front and 18x9.5 275/35 rear without fender roll?
I'd like to be running -2° camber out back and at least -1° up front.
I'm running 19x8.5 235/40 and 19x9.5 265/35 with no issues now (on Dinan springs, stock alignment).
Is there a downside to keeping 265/35 out back if I went with the 18x9.5" EC-7??
Thanks!!
|
I'm doing the same thing from 19 to 18 and have your setup also 19x8.5 235/40 and 19x9.5 265/35 which is 26.3" diameter. Going to 265/35/18 will drop down to 25.3" diameter and 275/35/18 to 25.6"
My option so far is EC-7 18x9 et31 245/45 or 255/40 26",26.7" diameter & 18x9.5 et43 275/40 26.7" diameter
No sure which one is worst smaller or taller over all diameter.