Quote:
Originally Posted by JupiterBMW
Those look pretty good. The ones I found were from Rogue engineering, cost is low too, but then you need oil cooler lines. Not hard to make a set though. I just need to map out the right Setrab unit and then build some brackets.
https://www.rogueengineering.com/Rog...ngs_p_324.html
|
Oh yeah, nice. Those definitely didn't exist when I built mine. I elected to keep as much hard line as possible since they have to route around some belts and pullies.
I ended up with a generic CSF core that I made a bracket for that seals off most of the flow in the lower opening, and then ducts down and out the bottom like the stock M3 air path. Works mint.