Quote:
Originally Posted by jadams161
if you have Protool or ISTA after changing the TC oil, run the oil reset and calibration procedure for the TC. It will reset the oil life sensor and set the adaptations for the TC. I've done this with every TC fluid change.
|
I have an Autophix 7910 scan tool, which has the capability to do transfer case oil resets. However, I keep getting a "communications error" and don't know why. I posted about it further down:
https://www.e90post.com/forums/showthread.php?t=2070215
BTW, I changed the transfer case fluid and it made no difference on the whining noise. I have an appointment with a European auto shop on the 15th for them to take a look at it. I'll ask them to do the reset and calibration, but I assume that will have no impact on my issue.