|
ctuna The car has the stock HiFi speakers, no changes there.
GSB good point about shorting them to ground! You are right about that not being helpful in the case that the short already IS a short to ground.
I think the best path forward sounds like what you guys suggested: wire up an analog audio output and drive each channel on its own from the amp side of the harness. That way I can drive around and see if anything cuts in or out, independently. I have an old headphone amp I can hack up to do this, and it can throw a good bit of gain as well. This way I also don't have to care about the amp or radio themselves, and only focus on the wiring and speakers, in individual channels.
This will probably be a task for this weekend. I will update you guys with findings when I get to doing this.
|