Quote:
Originally Posted by juanrikrdo
Yesterday a friend of mine helped me with the pin 13.
Now the amps "sleep" about 10 seconds after the OEM was turned off and they turn on when the car "wakes up" (sorry for the expression).
I'm still having parasitic draw. Searching for a RCA output adapter. I have found these products
Ground Zero adapter
http://www.caraudiodirect.co.uk/grou...evel-converter
N-RHL2 adapter
davidnavone.com/product/n-rhl2-2-channel-50-watt-per-channel-line-output-converter
They say I would need one of these to convert the stereo output (high level) to a signal the amp can read(low level).
What do you think?
Best Regards, |
How do you know you have a parasitic draw then? What are you using to determine this? Because if you now have the remote wired correctly, then its not the amp.
The ECUs in the car keep running for about 15 minutes after the car is turned off, so if you're checking the battery voltage in this time you are going to see a current draw.
I think you would want the middle harness:
http://technicpnp.com/product_purcha...eries_E82.html