Quote:
Originally Posted by vanondemand
Once my car starting shaking violently and then it just died, Turns out it was my vanos solenoid, replaced and works just fine now
|
Quote:
Originally Posted by Three_thirty_I
For rough and jumping idle on these cars, check this video!!
A faulty eccentric shaft sensor (Valvetronic position sensor) can cause this as shown above!
|
I am chasing a misfire on my 2007 328i that has given me a very rough idle that shakes the engine and no capability to drive. However the E-shaft sensor problem doesn't throw any codes and I have quite a few.
I'm wondering if this is the right place to look for solving it. I've read a few threads since joining today but cant seem to find my exact symptoms.
I have attached this list of engine codes I have below
I have replaced the following:
-Spark Plugs (All 6)
-Ignition Coils (All 6)
-Injectors (All 6)
-Fuel pump
-Crankcase Breather Valve
-Crankcase Breather Hose
-Crankshaft Sensor
-Blown F04 Fuse
I have misfire on cylinders 5&6 and it occurred randomly one day when I was a few hundred yards away from home