Quote:
|
Originally Posted by antzcrashing
Quote:
Originally Posted by Len_Beach
Pop the cap off the back when it's dry and try and run for an extended time with the lights on to give it the best chance of drying out.
You could also gently heat from the front with a hair dryer with the cap off.
Make sure the seals on the cap are good and that it seats properly.
If you have the hatch on the top of the unit; again make sure that it's seated and screwed down properly and the seals are good.
|
By the hatch on the top of the unit, do you mean the HID unit, or the hatch on entrance of headlight unit? I havent checked these but I will. Thanks |
Check the round cap on the back and number 7 on this picture if you have it.
http://parts.bmwofsouthatlanta.com/s...&ukey_make=973