View Single Post
      11-09-2020, 10:33 AM   #99
nzavleX
Registered
United_States
0
Rep
1
Posts

Drives: 2011 BMW E90
Join Date: Sep 2018
Location: NYC

iTrader: (0)

Hi, Thanks for the thread and write up. helped quite a bit whilst doing this on my e90. The Driver seat worked marvelously after the connector and module swap, the one issue I have is the passenger seat. It seems to be dead and the occupancy/air bag light came up. I swapped the module from my e90 seat, however it was different from the driver module, it was a small black module with only 3 connectors. I do have OEM heated and electric seats so not sure why the module is different. Could you help me out with the pin out for the pass side, perhaps an image of the underside of your seat?

Thanks in advance, appreciate the help
Appreciate 0