Quote:
Originally Posted by drwankel
Not true. 11" +25 works perfectly on the rear on stock ride height or zcp ride height. Been running it for a few years now, on stock zcp ride height.
There is a very slight amount of rubbing that occurs initially on the nub between the bumper and fender, but it will self clear. Again- it is very slight.
|
Thanks for the info and pic. I’m trying to run a 305 so probably needs to be 5-8 mm less aggressive offset. I’ve seen some 11” setups with 305s and the offsets have been around 30-32. This seems about right compared to your 11et25/295 setup because a 305 is 12-15 mm wider than a 295 so 5-8 mm higher offset for the same frontspacing. I’m also running a lower ride height on MCS 2WR suspension with F/R 500/800 lbf/in springs.