BMW 3-Series (E90 E92) Forum - View Single Post

bajandrifter · 01-23-2015, 09:54 AM

easy, pull them out. look where the springs connect to the plastic around the nozzle, that bit actually clips off. you can then turn the spring clockwise to shorten them and increase the tension. this should allow them to snap back in when used.

01-23-2015, 09:54 AM	#2
bajandrifter YouTuber @SALVAGE NATION 15 Rep 193 Posts Drives: BMW 325I LCI E92 Join Date: Apr 2013 Location: east london iTrader: (0)	easy, pull them out. look where the springs connect to the plastic around the nozzle, that bit actually clips off. you can then turn the spring clockwise to shorten them and increase the tension. this should allow them to snap back in when used.
	Appreciate 0 Quote