E90Post
 


 
BMW 3-Series (E90 E92) Forum > BMW E90/E92/E93 3-series General Forums > General E90 Sedan / E91 Wagon / E92 Coupe / E93 Cabrio > E92/N52 Whistling/Squealing sound coming from belt or pulley



Reply
 
Thread Tools Search this Thread
      02-12-2014, 03:31 PM   #1
asonntag
New Member
7
Rep
12
Posts

Drives: 2007 328i Coupe
Join Date: Jan 2014
Location: Berkley, MI

iTrader: (0)

E92/N52 Whistling/Squealing sound coming from belt or pulley

I have a whistling/squealing sound coming from a pulley, belt or idler tensioner....I believe. Thought I'd check and see if anyone else is having a similar issue before I go replacing parts.

It's an intermittent problem that happens maybe 10% of the time. So it's pretty much impossible to have a shop diagnose.

I've heard the noise in all weather conditions, so I don't believe it has anything to do with getting wet or being cold. It's never done it from a cold start up. It seems every time I've heard the noise the engine has at least had a chance to warm up.

The noise is the loudest when sitting at a light idling or cruising at any speed. It seems when I accelerate the noise pretty much goes away.

The weird thing is if I shut the car off and immediately restart it. The noise disappears and does not come back for days or weeks.

Any ideas where to start? Or how to quickly pull over and identify the source of the noise next time I hear it?
Appreciate 0
      02-12-2014, 04:15 PM   #2
mlifxs
Diamond Geezer
mlifxs's Avatar
212
Rep
2,385
Posts

Drives: Jet Black 2007 328i Saloon
Join Date: Nov 2007
Location: Florida

iTrader: (6)

Garage List
could be belt related or....
there are noise issues related to valve cover, vanos solenoid, eccentric shaft sensor as well. I have a thread "CEL and a whistle" that may or may not be relevant. There is a recent thread in the n52 subforum regarding P0012 error msg, that might be relevant. I would browse /search that forum and the maintenance forum. If it keeps happening, have someone inspect the belt or scan the car for codes.

edit for...
link to CEL and a whistle
http://www.e90post.com/forums/showthread.php?t=691932
link to P0012 error
http://www.e90post.com/forums/showthread.php?t=719660

hopefully it's something simple like a belt or cleaning the vanos solenoids.

note your car may be recording BMW codes even without a check engine light. There is some good windows software out there ... **************.com if you want to check codes yourself. If you have a check engine light, autozone and other such places can read it for free, but they may not be able to see the BMW codes.

Last edited by mlifxs; 02-12-2014 at 04:24 PM..
Appreciate 0
      02-12-2014, 04:31 PM   #3
mlifxs
Diamond Geezer
mlifxs's Avatar
212
Rep
2,385
Posts

Drives: Jet Black 2007 328i Saloon
Join Date: Nov 2007
Location: Florida

iTrader: (6)

Garage List
Quote:
Originally Posted by asonntag View Post

The noise is the loudest when sitting at a light idling or cruising at any speed. It seems when I accelerate the noise pretty much goes away.

The weird thing is if I shut the car off and immediately restart it. The noise disappears and does not come back for days or weeks.
My car did this as well.
Appreciate 0
      02-12-2014, 04:37 PM   #4
GoRomeo
Brigadier General
GoRomeo's Avatar
United_States
956
Rep
3,837
Posts

Drives: 330i, 135i
Join Date: Feb 2006
Location: San Diego CA

iTrader: (0)

Garage List
2008 BMW 135i  [9.50]
2006 330i  [6.75]
Most likely your belt tensioner needs to be replaced. Good luck!
Appreciate 0
      02-13-2014, 10:00 AM   #5
asonntag
New Member
7
Rep
12
Posts

Drives: 2007 328i Coupe
Join Date: Jan 2014
Location: Berkley, MI

iTrader: (0)

Quote:
Originally Posted by GoRomeo View Post
Most likely your belt tensioner needs to be replaced. Good luck!
That's what I thought the first time I heard the noise. But it doesn't make sense that when I restart the car the sound goes away. All cars I've had in the past seemed to make noise 24/7 once the belt or tensioner started to go bad.
Appreciate 0
      02-13-2014, 04:09 PM   #6
GoRomeo
Brigadier General
GoRomeo's Avatar
United_States
956
Rep
3,837
Posts

Drives: 330i, 135i
Join Date: Feb 2006
Location: San Diego CA

iTrader: (0)

Garage List
2008 BMW 135i  [9.50]
2006 330i  [6.75]
Quote:
Originally Posted by asonntag View Post
That's what I thought the first time I heard the noise. But it doesn't make sense that when I restart the car the sound goes away. All cars I've had in the past seemed to make noise 24/7 once the belt or tensioner started to go bad.
Ok, next step I would do is to clean the vanos solenoids. Its easy and fast. No need to buy parts yet. This way you can discard this posibility without hitting your wallet.
Appreciate 0
      01-17-2017, 03:44 AM   #7
ironclaw
Registered
2
Rep
4
Posts

Drives: 2007 130i
Join Date: Jun 2016
Location: Dublin, Ireland

iTrader: (0)

I'm sorry to open an old thread, but my E87 130i (2007/Manual) has just started doing this exact same thing as per asonntag's opening post.

No error codes, CEL etc.

Did anyone positively identify a fix?
Appreciate 0
      01-17-2017, 10:40 PM   #8
M335M'RIZED
New Member
0
Rep
14
Posts

Drives: 2011 e92 335xi M-Package
Join Date: May 2016
Location: New Jersey

iTrader: (0)

Had my accessory belt swapped out due to the squeaking problem and in the process my mechanic found the true cause. Oil leaking onto the belt and pulley from gaskets that have went on the oil filters. It has been about 6+ years ago my e92 was produced so it was bound to go. Check it out because if you do just the accessory belt without checking you can have oil ruin the new one. This only arouse during the colder weather for whatever reason
Appreciate 0
      08-28-2017, 01:20 PM   #9
trd5004
Registered
0
Rep
1
Posts

Drives: 2006 325xi
Join Date: Aug 2017
Location: Pittsburgh

iTrader: (0)

I've been having this same "chirping" noise in my 2006 325xi. I've replaced the tensioner unit and idler pulley and I'm still getting the noise. I also put a new belt on when putting these new parts in. It only does it for roughly 10 seconds when I start the car, goes away, then comes back at lower speeds mostly when I'm not accelerating. I don't have any fault codes showing....does anyone have any advice for this? I don't want to replace all the pulleys if I don't have to but this sounds is driving me crazy!
Appreciate 0
      09-02-2017, 10:57 AM   #10
cybermgm23
Second Lieutenant
cybermgm23's Avatar
United_States
54
Rep
297
Posts

Drives: E90 328i, Jet Black
Join Date: May 2016
Location: San Francisco

iTrader: (0)

It's the belt tensioner, just went though this with the dealer, replaced under warranty. Apparently 1 of 2 things happen, 1) the bolt head that holds the tensioner in place shears off causing it to sit slightly ajar and thus causes the belt to "dance" or 2) the tensioner spring stretches over time and then no longer applies the correct tension and causes the belt to slip. It's a cheap part to replace. However if you let it go and the belt slips while at speed, it can get wrapped around the main crank and get sucked in through the main seal and into the timing chain causing catastrophic failure. You don't want to ignore this common issue.
Appreciate 0
      09-02-2017, 02:50 PM   #11
dannyjones
Lieutenant
82
Rep
405
Posts

Drives: 2011 BMW 335i M-Sport
Join Date: Jan 2014
Location: Florida, USA

iTrader: (0)

Quote:
Originally Posted by trd5004 View Post
I've been having this same "chirping" noise in my 2006 325xi. I've replaced the tensioner unit and idler pulley and I'm still getting the noise. I also put a new belt on when putting these new parts in. It only does it for roughly 10 seconds when I start the car, goes away, then comes back at lower speeds mostly when I'm not accelerating. I don't have any fault codes showing....does anyone have any advice for this? I don't want to replace all the pulleys if I don't have to but this sounds is driving me crazy!
That could be a bad pcv valve stuck open. Causes excessive vaccuum in the crankcase from the intake vaccuum, especially at idle or deceleration. The excessive vaccuum causes air to be sucked through the front or rear main seals making that noise. Mine currently has this problem and I'm waiting for cooler weather to replace the valve cover (integrated pcv valve on the n55)
Appreciate 0
      11-20-2017, 08:12 PM   #12
moneybimmer
BMW is life
moneybimmer's Avatar
Canada
2
Rep
6
Posts

Drives: 2011 BMW 328Xi
Join Date: Nov 2017
Location: Winnipeg

iTrader: (0)

Garage List
2011 BMW 328xi  [10.00]
is it the same problem as mine for noise ?
__________________

BMW is life
Appreciate 0
      11-21-2017, 06:28 PM   #13
markv123
Private First Class
45
Rep
139
Posts

Drives: .
Join Date: Jan 2016
Location: Sydney

iTrader: (0)

I've had a chirping / high whistle sound, etc, etc and made a thread.
My solution is at the end.
This was for me though and maybe not for the recent posters here.
Good luck

http://www.e90post.com/forums/showthread.php?t=1311941
Appreciate 0
      08-20-2018, 01:13 PM   #14
Rod4a
Registered
0
Rep
4
Posts

Drives: 2011 328ix
Join Date: Aug 2018
Location: TN

iTrader: (0)

Squealing noise

Quote:
Originally Posted by moneybimmer View Post
is it the same problem as mine for noise ?
Did you figure this out? I have the exact same issue.
Appreciate 0
      08-20-2018, 01:14 PM   #15
Rod4a
Registered
0
Rep
4
Posts

Drives: 2011 328ix
Join Date: Aug 2018
Location: TN

iTrader: (0)

Squealing noise

Quote:
Originally Posted by mlifxs View Post
My car did this as well.
Did you figure this out? I have the same issue.
Appreciate 0
      12-06-2018, 08:55 PM   #16
tspv6570
New Member
United_States
0
Rep
8
Posts

Drives: '09 TiAg E82
Join Date: Jul 2012
Location: Atlanta, GA

iTrader: (0)

2011 E90 328XI manual

Hi all, my car has been making this high pitched chirping noise for almost a year, it seems to come from the passenger side foot well. Happens when the engine is cold, at around 2000 RPMs, the AC or fan is on, while turning left and pressing the gas. Mechanic replaced the tensioner, pulley and serpentine belt but the noise didn't go away. Any clues as to what could be causing it?

Below is a link to the voice note with the annoying sound:

https://www.dropbox.com/s/g8meuhxi8w...0copy.m4a?dl=0
Appreciate 0
Reply

Bookmarks

Tags
328i, belt, n52, pulley, tensioner


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:41 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST