Dinan HP Question.

gonzo · 12-30-2008, 08:23 PM

Admins if you can leave this here long enough to, hopefully, get an answer I would appreciate it.

If this set up was done on an 02' M5 (400hp) does anyone have a close educated guess as to what the hp numbers "should" be? Crank or wheel. I could not find much on the motor pieces combination. Torque figure would be a bonus. Thanks.

Stage 5 Dinan software, Dinan carbon fiber cold air intake and upgrade kit, Dinan high flow air flow meters, Dinan high flow throttle bodies, full Dinan exhaust, Dinan 3.15 limited slip differential, Dinan stage 1 lightened flywheel, stainless steel brake hose kit, front and rear cross drilled rotors, Bekkers headers, Dinan front strut tower brace, Dinan rear shock tower brace.

gonzo · 12-30-2008, 08:40 PM

Never mind. I'll copy it for the curious. Good night....

I was looking up the wrong frig'n thing. Mucho stuff for 70hp......

Stage 5 Engine Software
High Flow Cold Air Intake
High Flow Air Mass Meters
High Flow Throttle Bodies & Velocity Stacks
Header System
Free Flow Exhaust
Stage 2 Suspension System
3.45 Limited Slip Differential
Stage 1 Lightweight Flywheel
Dinan Deck Lid Badge;
Serial Numbered S2- M5 Plaque

Peak Horsepower: 470 @ 6900 rpm
Peak Torque: 419 lb/ft @ 5000 rpm

12-30-2008, 08:23 PM	#1
gonzo Lieutenant General 10199 Rep 14,397 Posts Drives: as many as possible Join Date: Jan 2007 Location: TeXXXas iTrader: (0)	Dinan HP Question. Admins if you can leave this here long enough to, hopefully, get an answer I would appreciate it. If this set up was done on an 02' M5 (400hp) does anyone have a close educated guess as to what the hp numbers "should" be? Crank or wheel. I could not find much on the motor pieces combination. Torque figure would be a bonus. Thanks. Stage 5 Dinan software, Dinan carbon fiber cold air intake and upgrade kit, Dinan high flow air flow meters, Dinan high flow throttle bodies, full Dinan exhaust, Dinan 3.15 limited slip differential, Dinan stage 1 lightened flywheel, stainless steel brake hose kit, front and rear cross drilled rotors, Bekkers headers, Dinan front strut tower brace, Dinan rear shock tower brace. __________________ Crazy Diamond
	Appreciate 0 Tweet Quote

12-30-2008, 08:40 PM	#2
gonzo Lieutenant General 10199 Rep 14,397 Posts Drives: as many as possible Join Date: Jan 2007 Location: TeXXXas iTrader: (0)	Never mind. I'll copy it for the curious. Good night.... I was looking up the wrong frig'n thing. Mucho stuff for 70hp...... Stage 5 Engine Software High Flow Cold Air Intake High Flow Air Mass Meters High Flow Throttle Bodies & Velocity Stacks Header System Free Flow Exhaust Stage 2 Suspension System 3.45 Limited Slip Differential Stage 1 Lightweight Flywheel Dinan Deck Lid Badge; Serial Numbered S2- M5 Plaque Peak Horsepower: 470 @ 6900 rpm Peak Torque: 419 lb/ft @ 5000 rpm __________________ Crazy Diamond
	Appreciate 0 Quote