|
|
04-10-2009, 08:27 PM | #1 |
Major
200
Rep 1,293
Posts |
HID HALO SEVERE MALFUNCTION!!!!!! Guru's chime in please
After 8 months of having HID halos, I have concluded they are the worst investment you can ever make! Last night about to head out the car wanted to blow up. All of sudden front passenger turn signal flickered and stayed on along with driver fender turn signal and the rear turn signal.....Yes the opposite sides of the car have something wrong with the turn signal staying on. The best part is the halo driver side stays on no matter what!!!!
You like my messages? I pulled out fuse 86 which turned off all the turn signals but now my passenger side headlight dosent turn on. (I pulled this fuse for trial and error) I disconnected battery and checked every fuse in the glove box. Is there another place with hidden fuses?? For those of you wondering: MY CAR Last edited by TonyTone; 04-10-2009 at 10:39 PM.. |
04-10-2009, 09:00 PM | #2 |
First Lieutenant
38
Rep 387
Posts |
Oh man.
I doubt that it is the worst investment. I've had electrical issues-when I installed my Performance wheel with the whole steering/EDC/ABS/wipers going haywire. Check your wiring as a loose connector can cause failure of the whole lighting system. |
Appreciate
0
|
04-10-2009, 09:47 PM | #4 | |
Major
200
Rep 1,293
Posts |
Quote:
What do you mean? You used my car to advertise your product!!!! |
|
Appreciate
0
|
04-10-2009, 09:49 PM | #5 |
135
Rep 1,825
Posts |
Yea i know but im saying you need my circuit and harness! Its still hooked up from when that guy did it. He taps into the ECU box and didnt use the circuit. That tap into your ECU is causing the errors i promise you. JEMarsal was hooked up the same way and kept going into limp mode. After I installed my kit it worked flawless. You never installed my circuit and harness! Pm me
|
Appreciate
0
|
04-10-2009, 10:34 PM | #6 | |
Major
200
Rep 1,293
Posts |
Quote:
Chris I am asking for someone's help to get this situated. The HIDs were taken off immediately and still nothing! (ECU was never tapped) |
|
Appreciate
0
|
04-10-2009, 10:38 PM | #7 |
135
Rep 1,825
Posts |
ok i was just letting you know He tapped into the ECU i promise you. Thats how he does it.... your probably going to have to have the dealer reset it.....I already did it for JEmarsal......
|
Appreciate
0
|
04-10-2009, 10:44 PM | #8 |
Major
200
Rep 1,293
Posts |
Chris please read thread.... The lights stay on after the fact the car is off and closed. The lights DO NOT SHUT OFF!! I needed to remove a BMW fuse just for them to turn off. I have to put the fuse back in just to be able to drive around
|
Appreciate
0
|
04-10-2009, 10:50 PM | #9 |
135
Rep 1,825
Posts |
I know im telling you i know exactly why.... give me a call and ill fix it for you.... Its from the way that guy hooks up them up. Thats why i dont tap into the ECU or anything with my kit. JEMarsal had THE SAME PROBLEM and i fixed it.
Last edited by camaross305; 04-10-2009 at 11:16 PM.. |
Appreciate
0
|
04-10-2009, 11:02 PM | #10 |
First Lieutenant
50
Rep 312
Posts |
OUCH, hope you get it solved man, let me know if you need my help, you can pass by the crib. Ill slap on some LED angels in there instead
__________________
|
Appreciate
0
|
04-11-2009, 09:50 AM | #11 |
Colonel
154
Rep 2,736
Posts |
Maybe you should let Chris give it a try and see if he can fix it! He seems like he genuinely wants to help you
__________________
‘23 RRS First Edition
'22 X7 M50i '18 R8 V10+ http://www.bimmerpost.com/forums/attachment.php?attachmentid=133578&d=1204654487[/IMG] |
Appreciate
0
|
04-16-2009, 05:54 PM | #12 |
Captain
37
Rep 977
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
bad, halo, hid |
|
|