[essex_lad]

Hi guys over the weekend I bought a carbon 335i rear diffuser and had a custom stainless 335i style back box setup with 4'' slash cut tips. Iv got no drone what so ever just sounds more throaty when I put my foot down. I have a feeling I should of used 3 1/2 inch tips but what do you guys think?

From this:



To This:

[mashimarho]

Looks good.

[essex_lad]

thank you.

[eumayam]

Looks great. What muffler did you use?

[Taran.J]

Originally Posted by eumayam

Looks great. What muffler did you use?

This!

[essex_lad]

I used a universal one which was made in the u.k.

[essex_lad]

Just added a video to the first post guys.

[BlueNGT]

Did you do this yourself?

I would be more than happy with a set up like that on my e90 330i but only people I can find are MIJ whose work looks great but is stainless twin box outlet set up.

[essex_lad]

yes me and a friend did it.

[BlueNGT]

This would be perfect for what I want. Not too much noise, not having half the system chopped off and just great looks and simple.

You say a Universal rear muffler was used - I am uk based where did you get it from?

Was it twin exit already and you added the extra length, bend and the tips?

I have seen others on here mention MIJ but like most things bad reviews are only a click away and you never know who to believe.

I cant weld but getting a local garage to do this would be my preferred choice if possible.

Sorry for all the questions but I want mine done soon.

Thanks in advance

[grimwood1992]

You say you did this your self bud can you expand how? How
Much did it cost you in total?

[essex_lad]

Originally Posted by grimwood1992

You say you did this your self bud can you expand how? How
Much did it cost you in total?

Because im a welder fabricator by trade, I just had a little help off a friend with a hydraulic pipe bender rather than doing it all with angled cuts, but you can get the exhaust done for £300 as I did have it quoted once in case I didn't ever have the time to dot it but luckily I did.

[grimwood1992]

Originally Posted by essex_lad

Because im a welder fabricator by trade, I just had a little help off a friend with a hydraulic pipe bender rather than doing it all with angled cuts, but you can get the exhaust done for £300 as I did have it quoted once in case I didn't ever have the time to dot it but luckily I did.

Ok bud, would you consider doing it on mine??

[Dark_Knight_335]

Good work Essex- looks great!

[Eat.Sleep.Race]

Nice! Looks great

[essex_lad]

Thanks guys and I'm afraid my unit is no longer next to my mate with the pipe bender so it would be a bit of a pain to do. But I have a friend that does exhausts and he is extremely good.

[grimwood1992]

Originally Posted by essex_lad

Thanks guys and I'm afraid my unit is no longer next to my mate with the pipe bender so it would be a bit of a pain to do. But I have a friend that does exhausts and he is extremely good.

Oh really can you get a quote from him for me bud, or let me have his contact details.

Cheers

Mike

[essex_lad]

he said he will do the same as mine for £290

[grimwood1992]

Originally Posted by essex_lad

he said he will do the same as mine for £290

Is that using mild or stainless steel? How long will he need the car and where is his workshop? Pm me if you prefer bud.

[essex_lad]

stainless it would be cheaper out of mild steel. He will take about 2hrs and he is in Billericay. His place is called 4xreme / viper exhausts.

[grimwood1992]

Originally Posted by essex_lad

stainless it would be cheaper out of mild steel. He will take about 2hrs and he is in Billericay. His place is called 4xreme / viper exhausts.

Cheers for the help mate can you pm me his name and contact email or phone number.

[essex_lad]

Yep I'll get it over in the morning mate.