[AWSAWS]

Can someone do an actual recording of setting up coding on a win7 x64 machine and provide links for where the software can be found? Steps to take etc.

I am going to try again after many months of failing to get NCSExpert to run on my windows7 x64 machine. I don't want to use a vm etc. I'm sure 2.12 was x64 compatible.

People must have managed it now that 64 bit machines are so prevalent.

It's killing me!!!

[nate5ks]

Originally Posted by AWSAWS

Can someone do an actual recording of setting up coding on a win7 x64 machine and provide links for where the software can be found? Steps to take etc.

I am going to try again after many months of failing to get NCSExpert to run on my windows7 x64 machine. I don't want to use a vm etc. I'm sure 2.12 was x64 compatible.

People must have managed it now that 64 bit machines are so prevalent.

It's killing me!!!

I'll post one as soon as I get my cable. my cable distributor is no longer on ebay so I'm in search of a new one.

[Sensible_]

It's very easy, no guides needed.

Download this:

https://drive.google.com/file/d/0B0h...p=docslist_api

Password: https://docs.google.com/document/d/1...p=docslist_api

and this if needed:

https://drive.google.com/file/d/0B0h...p=docslist_api

Then just download latest BMW v54 daten files and use 'BMW Coding Tool' to update the sp-daten!

[wildcatcrazy]

If you're still having issues, I can do a remote install. Just shoot me a PM.

[AWSAWS]

Originally Posted by Sensible_

It's very easy, no guides needed.

Download this:

https://drive.google.com/file/d/0B0h...p=docslist_api

Password: https://docs.google.com/document/d/1...p=docslist_api

and this if needed:

https://drive.google.com/file/d/0B0h...p=docslist_api

Then just download latest BMW v54 daten files and use 'BMW Coding Tool' to update the sp-daten!

Thank you! I will try it out.

[_Ryan_]

1- Install Virtualbox
2- Build a W7 32bit VM
3- Setup as per guides

[allotherareused]

Originally Posted by AWSAWS

Can someone do an actual recording of setting up coding on a win7 x64 machine and provide links for where the software can be found? Steps to take etc.

I am going to try again after many months of failing to get NCSExpert to run on my windows7 x64 machine. I don't want to use a vm etc. I'm sure 2.12 was x64 compatible.

People must have managed it now that 64 bit machines are so prevalent.

It's killing me!!!

Most of CAN/D-CAN cable using same chip and this is available for x64 now. I was for 2 years on 32bit and just installed win7 x64 and this is working.

http://www.ftdichip.com/Drivers/D2XX.htm

Standard tools 2.12 works on x64.

If you want to use other applications you MAY need to use win32 compatibility, I still didn't tested/checked for example diaghead etc ...