For those running meth (map 3) + G5 board...

[LAZ]

Couldn't find info on this on any of the forums, so I had to email Terry.
Thought starting a thread would benefit future users with the same question.

For those running meth (map 3) + G5 board...

What do you guys have your additive set to?
What do you guys have the boost failsafe psi set to?

Default failsafe is set to 18 psi , which may be too low for anyone running a 60 additive.
Terry informed me to set mine to 20 if I run a 55 additive. That would put me at around an 18 psi target, which would give me a 2 psi cushion.

Just wondering what additive people are running with the new G5 + meth and/or E85 mixes or those who run both meth + E85 mixes, since G4 board was really only able to support a 40 additive.

Im thinking of running a 50 additive when on 93 + meth and doing a 60 additive if i ever run a 30/70 E85/93 mix + meth....

What do y'all think?