|
|
|
05-13-2013, 11:36 AM | #1 |
OneThirty5Eye
105
Rep 250
Posts |
For those running meth (map 3) + G5 board...
Couldn't find info on this on any of the forums, so I had to email Terry.
Thought starting a thread would benefit future users with the same question. For those running meth (map 3) + G5 board... What do you guys have your additive set to? What do you guys have the boost failsafe psi set to? Default failsafe is set to 18 psi , which may be too low for anyone running a 60 additive. Terry informed me to set mine to 20 if I run a 55 additive. That would put me at around an 18 psi target, which would give me a 2 psi cushion. Just wondering what additive people are running with the new G5 + meth and/or E85 mixes or those who run both meth + E85 mixes, since G4 board was really only able to support a 40 additive. Im thinking of running a 50 additive when on 93 + meth and doing a 60 additive if i ever run a 30/70 E85/93 mix + meth.... What do y'all think? Last edited by LAZ; 05-14-2013 at 09:03 AM.. |
Post Reply |
Bookmarks |
Tags |
additive, failsafe, g5 board, jb4, meth |
|
|