Quote:
Originally Posted by nearwater4me
Hello, all.
I've recently noticed that my seat does not recline all the way with one click.
So, press and hold the recline switch and it moves a few inches and stops.
|
There is nothing wrong, you must be accustom to the older operation; as a safety measure, the newer software iterations, the power seat stops, in increments, so the driver has more control of seat's trajectory, to avoid possible crushing anyone or anything, as it retracts by the older one-touch, auto-moving seat operation..
There is no "anti-pinch" sensors in the seat of the M2, that would be able to detect an obstacle or body part and immediately stop and it starts operating in reverse direction, to avoid potential injury. So BMW's solution to this potential liability was to programmed the seats to operate, with a need to keep pressing the switch, so the operators becomes more aware that it detracts, to avoid any mishaps.
There no way to code it back the older setting, as far as I see, as it's written into the programming.
Drivers seat memory buttons
https://g05.bimmerpost.com/forums/sh....php?t=1668728