|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
BC BR front height adjustment
|
|
07-07-2013, 12:03 AM | #1 |
Where'd my VTEC go?
481
Rep 6,067
Posts |
BC BR front height adjustment
Just got BC BR coils installed. With the proper preload set in the front, they cannot go very low. There is about 1/2 inch of shock body threads left, but it won't screw down into the base any further. Anyone have this issue with BC?
I know I can lower the spring seat collars, but that will get rid of the spring preload and cause clunking over bumps so I don't want to do that.
__________________
AW/Terra | ZSP | ZPP | ZCW | iDrive | CA
Mods: BC BR coilovers | Blacklines | M-tech rear | dual exhaust | M3 steering wheel | BMW SSK | ZHP shift knob | High-kick CF spoiler | NBT Retrofit M3 front control arms | M3 rear guide rods | Manzo rear toe and camber links | Monroe rear shock mounts | Varrstoen ES1 19x9.5+20 Front, 19x11+25 rear |
07-08-2013, 05:53 PM | #3 |
Colonel
159
Rep 2,561
Posts |
Two things:
1) They will not clunk if you lose all the preload. I had mine all the way down with no problems. 2) They don't go very low unless you order the "super low" version of the coilovers. I would suggest either getting them replaced with the BC super lows, or lowering them all the way down. You still have 6-8 threads there.
__________________
Montego Blue 2007 E92 335i - ZSP / ZPP / Steptronic / Logic7 Broadway Static - CCW - Megan - Orion Instagram: bmwforlife |
Appreciate
0
|
07-08-2013, 11:09 PM | #4 |
Where'd my VTEC go?
481
Rep 6,067
Posts |
The preload wasn't set properly when they were installed and they were definitely clunking. That's what prompted me to even check the preload.
And I did order the extreme drop version...so I'm thinking I was sent the wrong set...
__________________
AW/Terra | ZSP | ZPP | ZCW | iDrive | CA
Mods: BC BR coilovers | Blacklines | M-tech rear | dual exhaust | M3 steering wheel | BMW SSK | ZHP shift knob | High-kick CF spoiler | NBT Retrofit M3 front control arms | M3 rear guide rods | Manzo rear toe and camber links | Monroe rear shock mounts | Varrstoen ES1 19x9.5+20 Front, 19x11+25 rear |
Appreciate
0
|
07-09-2013, 01:55 PM | #5 | |
Colonel
159
Rep 2,561
Posts |
Quote:
__________________
Montego Blue 2007 E92 335i - ZSP / ZPP / Steptronic / Logic7 Broadway Static - CCW - Megan - Orion Instagram: bmwforlife |
|
Appreciate
0
|
07-10-2013, 03:58 AM | #6 | |
Banned
80
Rep 2,110
Posts |
Quote:
Those looks progressive and a large coil, extreme drop use a linear spring that is just larger than the shock body |
|
Appreciate
0
|
Bookmarks |
|
|