|
E93 roof pump
Okay so I’ve got an E93 and the roof isn’t currently working. I got a diagnostic done and they said I needed to chnage roof pump, two struts and rear flap. They quoted be £2000… I ended up getting all the parts for a couple 100. So I’ve switched the roof pump and I get these errors - 00A69A, valve 2 for rear end module and 00A69E, valve for roof shells. So using ista I did test plans and it told me to check voltage which i did and it was fine. Does this mean the roof pump I bought is bad too? However one thing that confused me was that in the wiring diagram it says the red and green wire should be connected to valve 2 however originally it was in valve 1 and the way it is positioned looks like it should be connected to valve one. I’ll also attach a picture I found online of the red and green connected to valve 1 (not the best quality but just about visible). Can anyone advise me on what steps to take, would be greatly appreciated. I’ve attached the wiring diagrams and a picture how it was and is on other cars.
|
