[jdm41305]

Car is an E90 N52 2007
After Completing all the mechanical aspects of the swap I have been stuck on the coding/wiring part and am unable to get the car started although cranking
For the swap I used the manual trans harness and added the clutch switch which seems to be working however I can only get the car to crank I believe the dme isn’t triggering the injectors and with an obd scanner it reports all injectors circuit low input
I have also already coded the car using ncs to rewrite VO on cas and frm and default coded all modules (need to add ground for dsc module to work again)
Ive Spent the last few days trying to figure out why it cranks no start but I’m running out of options and would really appreciate some help solving this