11-12-2021, 12:23 PM | #1 |
Private
17
Rep 50
Posts |
M-Performance caliper carrier hole distance
What's up gang!
First time poster here.. So I found a great set of M performance calipers used that I want to rebuild and refurbish. They are the oranges. To be certain these will fit my 340i I would like to measure the carrier bolt hole distancewhen I meet up with said vendor. To ensure they will fit. So a few questions? 1) What is the carrier bolt hole distance on the Grey standard brembos. center to center so I can measure against these used ones 2) I believe no programming of the ecu would need to take place when swapping out calipers from grey brems to m performance. 3) any web links to dimensional drawings. thanks for all your help...please trust that I used the search button... |
11-12-2021, 12:55 PM | #2 |
Lieutenant Colonel
994
Rep 1,934
Posts |
It will fit and bolt on without issue. Your previous calipers were grey so you had 340mm rotors. If the set you found are factory orange then they are 370mm and you will need new rotors front and rear (345mm). The bolts are the same. The brake hoses are the same. You don't need larger dust shields. You don't need a new master cylinder. You don't need any coding. Bolt on and go.
__________________
F30 335iX | Remus Axleback | Fabspeed Catted DP | VRSF Comp IC | 18X9 ET35 19lb MT1 | 255/40/18 ECS | Ohlins RT Millway Street | Millway Control Arm Bushings | Turner Endlinks | TMH 75mm 14x1.5 Studs | BMW MPerf LSD | XDelete | Pipercross Filter | MHD Stg2 93
|
Appreciate
0
|
11-12-2021, 03:27 PM | #3 | |
Major General
4550
Rep 5,409
Posts
Drives: 2015 BMW 335i x-Drive Auto
Join Date: Oct 2017
Location: New Jersey/Philadelphia
|
Quote:
|
|
Appreciate
1
1bad14-F3030.50 |
11-12-2021, 07:23 PM | #4 | ||
Private
17
Rep 50
Posts |
Quote:
So you can feel me why I wanted to confirm before I purchase..I wanted to ensure the carrier bolt spacing was the same. any part numbers on these calipers?? just want to make sure I am getting the right product. i am always fearful buying second hand. I am aware of the rotor, pad, lines and dust shield. appreciate the replies |
||
Appreciate
0
|
11-13-2021, 02:41 AM | #5 | |||
Major General
4550
Rep 5,409
Posts
Drives: 2015 BMW 335i x-Drive Auto
Join Date: Oct 2017
Location: New Jersey/Philadelphia
|
Quote:
There are raised numbers in the back of the casting that you'll want to look for on the front calipers. You should see "370/380". On the back of your Grey stock front Brembo you will see "340". See photos. (Ignore caliper colors in photos. Just look at numbering. The same would be on orange calipers from the M Performance Brake Kit) |
|||
Appreciate
0
|
Post Reply |
Bookmarks |
|
|