What have you done with or to your M3 today?

[Gossypiboma]

Originally Posted by Cmassey3

Yeah, my current set is the ECS from Discount as well.I mostly thought it was interesting that the OE spec for the 220m rims is a semi-slick track tire. With the last E92 M3 being produced in 2013, I was surprised to see that any tire shop bothered with an OE spec at all.

The pilot sport cup 2 is not a semi slick track tire. That would be the cup 2r.

[Cmassey3]

Originally Posted by Gossypiboma

The pilot sport cup 2 is not a semi slick track tire. That would be the cup 2r.

Ah, maybe I got mixed around in the review videos. The cup tire range is kinda samey with the names. Either way, it's way hotter of a tire than I'd expect for an OE that's not a clubsport trim like Porsche GT/BMW GTS

[spammysammich]

Got my mr12volt CIC CarPlay box installed and pretty much dialed in, threw on some wax, then took the birthday boy to a Mustang/Shelby car show at Triple X in Issaquah. I didn't get good pics of the CarPlay but there's a whole thread dedicated to it. Really makes the car feel more modern and adds more flexibility to the iDrive system.

[Rino924]

Replaced cabin filters, installed my MLT undertray and replaced front rotors and pads. I was getting some pad float or something and it made a click/clunk under light braking.

Cleaned everything off really good, replaced the parts and so far so good!

[kcdedric]

Spent a lot of time perfecting the fit/look of this Corsa exhaust (originally E92 fitment) and finally had the tips welded back on today. Really happy with the clean look of the M Performance tips.

Hoping to get some video at some point, but so far the sound of the Corsa paired with the Dinan quad-resonated x-pipe is sublime. Initial impressions versus the Dinan mufflers that came off are that 1) the Corsa is actually quieter which I was surprised at, 2) the Corsa doesn't have a crisp bark like the Dinan on downshifts (probably due to the extra resonators on the Corsa), and 3) the Corsa below 4.5K rpms is really a special sound. I'm having trouble deciding which to keep!

[akkando]

Originally Posted by Cmassey3

Ah, maybe I got mixed around in the review videos. The cup tire range is kinda samey with the names. Either way, it's way hotter of a tire than I'd expect for an OE that's not a clubsport trim like Porsche GT/BMW GTS

When I asked they had the tires in the size I wanted but refused to sell them to me because they were not the OE tires.

[Pauliecas]

Doing some maintenance today.

-Diff fluid
-Air + Cabin
-Oil change
-Power steering flush with reservoir change
-Brake Flush

[Cmassey3]

Originally Posted by akkando

When I asked they had the tires in the size I wanted but refused to sell them to me because they were not the OE tires.

Did you ask for the PS4s or the Cup 2s?

[akkando]

Originally Posted by Cmassey3

Did you ask for the PS4s or the Cup 2s?

ps4s

[Donut Lord]

Walked past it in the garage to throw trash away lol

[importraceram]

Replaced my Apex Arc 8's with some Titan 7 TS5's. Overall I am happy with the look. I wasn't sure how I would feel leaving the OEM+ look to go to an all black aftermarket look but I like the change of pace. I am considering running a spacer out back (offset is et25) to push the rears out a bit. Does anyone running Titans have any input on this? In the name of less weight I will likely leave it alone for now but you never know.

P.S. I will be posting my Arcs soon if anyone is interest.

[SAMM3Y]

Originally Posted by Donut Lord

Walked past it in the garage to throw trash away lol

Welcome back DK!!

[GotV8?]

threw a battery tender on I after a nice wash and wax.....since we will be getting rain throughout the week in Ohio....so will be mostly driving my X5M until weather is nice again.

[rsyed]

some progress on my build plus new seats :-)

https://www.m3post.com/forums/showpo...19&postcount=5

[Adriano917]

Installed a Seems Legit Aluminum DS and its a lot better than the 2 piece. I recommend it if you don’t want to wait a year for a CF one.

[TractionControlDelete]

Originally Posted by AdonM3

I am not sure if they didn't close the hood all the way or if the car has been in a wreck. The left side hood gap looks terrible

They didn't close it all the way… I was shocked at how firmly it needs pushed shut. Damn near feels like the hood will dent with how much it needs to be pressed down

[nycplumber]

Originally Posted by Adriano917

Installed a Seems Legit Aluminum DS and its a lot better than the 2 piece. I recommend it if you don’t want to wait a year for a CF one.

What made you do the switch?

[spammysammich]

Originally Posted by importraceram

Replaced my Apex Arc 8's with some Titan 7 TS5's. Overall I am happy with the look. I wasn't sure how I would feel leaving the OEM+ look to go to an all black aftermarket look but I like the change of pace. I am considering running a spacer out back (offset is et25) to push the rears out a bit. Does anyone running Titans have any input on this? In the name of less weight I will likely leave it alone for now but you never know.

P.S. I will be posting my Arcs soon if anyone is interest.

I've run a 12.5mm spacer out back and it looked great and didn't seem to rub. Didn't run it for long though. I'm on kw clubsports at 10mm under ZCP ride height for reference.

I had some vibration from a poor masking job during refinishing so I took the spacers off while troubleshooting. I'm going to run them again after road force balancing my wheels.

[Adriano917]

Originally Posted by nycplumber

What made you do the switch?

I was having the cowbell noise and I wanted to replace the DS, but I didnt want to wait 2 years for the MFactory one or spent $2k on the YCW one. This is a solid DS and for $1,250 its a great piece. Just make sure you install the washer or the bolt on the proper mark from the diff.

[TractionControlDelete]

Parked it in my driveway… took delivery today. Happy to be a part of the E9X family

[importraceram]

Originally Posted by spammysammich

I've run a 12.5mm spacer out back and it looked great and didn't seem to rub. Didn't run it for long though. I'm on kw clubsports at 10mm under ZCP ride height for reference.

I had some vibration from a poor masking job during refinishing so I took the spacers off while troubleshooting. I'm going to run them again after road force balancing my wheels.

What size rear tire do you have? I feel like I don't have an additional 12.5mm to play with. I am lowered on H&R springs (so not crazy low) and I have 285/35/18. I am considering between a 5-10mm spacer. Part of me says leave it alone and the other part of me says I won't be satisfied until I space it just a hair. 18x10.5 et25 isn't a bad fitment by any means but I just feel like it "needs" a bit more.

[spammysammich]

Originally Posted by importraceram

What size rear tire do you have? I feel like I don't have an additional 12.5mm to play with. I am lowered on H&R springs (so not crazy low) and I have 285/35/18. I am considering between a 5-10mm spacer. Part of me says leave it alone and the other part of me says I won't be satisfied until I space it just a hair. 18x10.5 et25 isn't a bad fitment by any means but I just feel like it "needs" a bit more.

Same size tire.