03-14-2024, 03:53 PM | #1 |
New Member
9
Rep 21
Posts |
Stage 2 N20 420ix F36 bootmod 3 datalogs
Hi!
I just collected some bootmod3 datalogs for my stage 2 tuned 420ix F36 and i wonder if anyone can take a look on the logs to determine if it looks good or bad. The car feels fine and runs great. It doesn't have any problems that i know and the datalogs looks ok according to my knowledge. The only thing i have noticed is that cylinder 3 ignition timing is always pulled more than the the others. Not 100% consistently but in most of my datalogs, the timing of cylinder 3 is pulled differently than the rest. Car: 2016 F36 420i xDrive Odometer: ~50k km Gas: 91 octane Ambient temp: 45-50 F / 7-10 C Elevation: sea level Motor: N20 EWG Tune: Stage 2 bootmod 3 and Stage 3 xHP transmission Spark plugs: Changed recently (BMW Original 12120039664) Coils: stock, ~50k km Oil: Changed recently Engine mods: Wagner HighFlow cat & Evo2 Comp IC, Injen intake, 3" exhaust Test: 3rd gear WOT 3 datalogs in 3rd gear WOT. https://www.bootmod3.net/log?id=65f3...8686674832d7e9 https://www.bootmod3.net/log?id=65f3...c45c0d8aa083af https://www.bootmod3.net/log?id=65f3...8686674832d9d3 Any things i should be worried about? Maybe i should try swapping/changing coil on cylinder 3? Thanks in advance |
Post Reply |
Bookmarks |
|
|