|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
ECS brake rotors for BMW: MADE IN …CHINA !!!
|
|
12-07-2012, 05:12 PM | #67 |
Midlife Crises Racing Silent but Deadly Class
1821
Rep 5,337
Posts
Drives: 2006 MZ4C, 2021 Tesla Model 3
Join Date: Oct 2007
Location: Welcome to Jamaica have a nice day
|
This reminds me of this one time...
I used to work at a very reputable automotive aftermarket company, based out here in the United States. I was tasked to hold a specific event to reward our loyal customers. I won't go into details, but let's just say it's an event not unlike what you'd get from BMW's ///M school, but only cost the participants $120 for a day. Because, you know, we wanted to really reward some of our most loyal customers. At the end of the day there were some prizes given away. Some including about $500 worth of parts, some including $500+ worth of DISCOUNTS from our participating vendor(s). A few months go by, and I get an angry email from the participant who won one of the grand prizes at the end of the day. He demand that we pay him $1,200 for the parts that was promised (we gave him the $500 part), which includes a brand new set of Michelin tires. I told him he was on crack. No where does it state that the Michelins were for free. And even if it did say so, it was clearly marked that "prizes are subject to change." Sure enough, said participant threatened to sue us and "ruin our reputation on the forums." I told him to go pound sand. He got a $1,200 worth of track day for paying $120, on top of that $500 worth of parts, AND a $500 discount on a new set of tires. Needless to say, said participant went on just about every single forum he could find that has anything remotely to do with our products and started bad-mouthing us. And was making harassing calls to our office daily asking to speak to the President and CEO, and left menacing voicemails on the phone. Finally my boss caved and told accounts payable to cut him a check for $1,200. I argued until I was blue in the face to NOT GIVE IN TO THESE TERRORIST DEMANDS. I was overruled. So what did we get out of the entire exchange? The douche on the other end of the phone got paid $1,080 ($1,200 minus his $120 entry fee), we had a sh*t load of threads bad-mouthing us on the forums and not once did the douche apologize or go back to edit his threads, and regardless of what we do, we ended up looking like the bad guys. I was furious. If we're going to look like bad guys anyway, why the f**k give in to his ridiculous demands? At the end of the day, the lesson learned here is, you either ESCALADE or you acquiesce as the vendor/manufacturer, and the stories you hear on these intarweb forums is NEVER what it seems.
__________________
Sitting on a beat-up office chair in front of a 5 year old computer in a basement floor, sipping on stale coffee watching a bunch of meaningless numbers scrolling aimlessly on a dimly lit 19” monitor.
|
Appreciate
1
lab_rat394.50 |
12-08-2012, 01:54 AM | #68 | |
Gateropode
329
Rep 2,848
Posts |
Quote:
The dirt cheap items are probably crap because their price doesn't allow for quality manufacture. However, expensive items are often targeting the poseur. The type of people who by the most expensive, because, well, if it is expensive it must be quality, right ? Well no. Sometimes it is just the same crap as above, but for 10x the price, so it looks richer. Remember that sometime, decreasing the price decreases the volume of sale, because the product is not perceived as quality by consumers anymore. Price is no indication of a good product. It may permit weeding the crap, if the price is unbelievably low, but anything in the medium price range is probably as good an item as something that is expensive but is not recognized for quality otherwise (probably better, even, as it targets value conscious, educated customers, rather than zealots that buy without comparing). |
|
Appreciate
0
|
12-11-2012, 12:40 AM | #69 |
Major General
81
Rep 6,092
Posts |
damn. this thread totally made a big deal about something that shouldn't have been this big of a dramatic issue.
__________________
|
Appreciate
1
|
12-11-2012, 08:05 PM | #70 |
Lieutenant
43
Rep 497
Posts |
Yea this thread was pretty useless to me unless there was some kind of comparison to stock and road tests. I could care less where its made if it works good.
|
Appreciate
0
|
12-12-2012, 11:48 AM | #71 | |
Major General
81
Rep 6,092
Posts |
Quote:
there are too many internet dweeb fucknuts that have this twisted sense of entitlement to everything in life. fuck them and all these complaint threads. fools need to get a life and stop tripping on their "power of the internet" bullshit.
__________________
|
|
Appreciate
0
|
12-12-2012, 05:25 PM | #74 | |
just another bmw douche bag
195
Rep 3,640
Posts |
Quote:
it's ignorant to assume quality (or lack of) solely because of place of manufacture. My car wasn't made in Germany, it was made in the South Africa plant, and has been more reliable than many of it's German counterparts. I've also used chinese made brake rotors many many times on other cars (and probably on my bmw, IDK), and have never had a single issue or failure, even when they got so hot during track days that the rotor hats turned blue. |
|
Appreciate
0
|
12-13-2012, 09:53 AM | #75 | |
Colonel
263
Rep 2,559
Posts |
Quote:
I also find the assumption that Asian products as such are likely to be of lower quality quite insulting and discriminatory. While there are certainly products with quality control problems in China or elsewhere, it is simply trivializing things to apply this assumption to any product from that region. 30 years ago people had the same attitude towards cars from Japan...while just a few years later it was obvious that cars from there have far better quality control than anything produced in the US. As to Performance Friction: I assume that you do not have much of an idea about the cost of their kits. Otherwise you would not compare them to ECS who are playing in a different league. If you want top-notch quality, you'll have to pay for it. To seek cheap products and then complain they're made in countries with low wages is, well, naïve to put it mildly. Alpina_B3_Lux
__________________
Audi R8 LMX, BMW M550i xDrive (G30 LCI); gone: Alpina B3 3,3 (E46), BMW 335i, Audi R8 V10 manual, Audi R8 V10, BMW M235i, BMW 550i F10
|
|
Appreciate
5
lab_rat394.50 |
12-14-2012, 11:52 AM | #76 |
Brigadier General
89
Rep 3,732
Posts
Drives: BMW S1000XR
Join Date: Jun 2011
Location: Gilbert, AZ
|
Did you read my posts? I didnt say all but MANY in China are suspect to poor quality due to their lack of Process Control Systems (PCS). Do you work in engineering and audit mfg facilities? I have over 20 yrs experience. ignorance ? No, experience. Please feel free to accompany us on our next trip to the outskirts of Shanghai for an audit, then to Germany.
__________________
BMWCCA member |
Appreciate
1
lab_rat394.50 |
12-19-2012, 04:21 PM | #77 |
just another bmw douche bag
195
Rep 3,640
Posts |
unless you can tell me exactly which chinese manufacturing plant those rotors came out of, than, yes, it is ignorant to assume they are of poor quality. Now if you go to that particular plant for inspection on your next excursion, then feel free to project an informed opinion on those products. but until then, your opinion is still uninformed, and doesn't hold any more weight than anyone else's on this forum.
|
Appreciate
0
|
01-04-2013, 05:09 PM | #78 |
Fancy Member
8
Rep 67
Posts |
Agreed that complaining about the source of a product after a purchase, and not addressing or performing any investigation to validate the assumed claim that "China/Taiwan manufacturing=bad", suggests OP just wanted to whine.
|
Appreciate
0
|
01-04-2013, 05:36 PM | #79 |
Midlife Crises Racing Silent but Deadly Class
1821
Rep 5,337
Posts
Drives: 2006 MZ4C, 2021 Tesla Model 3
Join Date: Oct 2007
Location: Welcome to Jamaica have a nice day
|
They've already done that.
__________________
Sitting on a beat-up office chair in front of a 5 year old computer in a basement floor, sipping on stale coffee watching a bunch of meaningless numbers scrolling aimlessly on a dimly lit 19” monitor.
|
Appreciate
0
|
01-04-2013, 05:57 PM | #80 |
Midlife Crises Racing Silent but Deadly Class
1821
Rep 5,337
Posts
Drives: 2006 MZ4C, 2021 Tesla Model 3
Join Date: Oct 2007
Location: Welcome to Jamaica have a nice day
|
Story time...
For over 50 years, the company I used to work for prided themselves on "made in America" and have had all manufacturing, machining, packaging, and EVERYTHING done here. While it was a tall order, we've always felt that American engineering is what made the company great, and American build quality is what our customers should get. Then in the late 199X and early 200X we started seeing a bunch of counterfeit and knock-off products on the market. Our competitors would take our designs, go to China, and have them manufacture our products for cheaper and bring them over here and sell them. And sell a lot of them. It's clearly hurting our bottom line. Company had to contract, people had to be laid off, and at one point a manufacturing process that has upwards of 200 people working shrunk down to ~50. For a while, we stand by and assume that our products are of better quality and our customers will continue to buy from us because we're made in America and are of better quality, and continue to market so..."Don't buy Chinese knock-offs! They're CRAP! 300 miles down the road it'll EXPLODE and take you and your car with it!" We ended up spending the last bit of cash and leveraged the resources heavily to borrow and BOUGHT our competitor. Then we started to look closely at their knock-offs from China, you know, before we tell them to shove off and stop making our stuff. And we were shocked that their quality is just as good, and sometimes, BETTER than our own. The material, the machining, and the quality is just amazing, especially considering the money paid to have this produced. The VP of Operations and the VP of Engineering looked at each other and said, "why the f**k are we making this stuff here?" By late 200X, 75% of our parts were made in China and assembled here in the U.S. And the reason why they're assembled here, is we're finding the Chinese plant would make our parts, assemble it, and then sell it to a third party. So we wised up and only have them make the parts, and make them at multiple plants, without any engineering drawing as to how they all get put together. The big picture part though, was after a few years we looked at the ledger and again was shocked, that despite moving 75% of our manufacturing to China, we were actually spending MORE MONEY on the manufacturing process when it's all said and done, since all the parts had to be assembled here...And instead of being able to enjoy a higher margin due to the lowered manufacturing cost, we were forced to deal with the Chinese manufacturing plant because, if we don't have them made there, they'll just knock off our product and turn it around and sell it for 1/3rd the price here. So what's the lesson to be learned here? I guess none. But what I will point out is, no matter what you buy now-a-days, they're ALL made in China. 1.5 billion in workforce means sh*t gets done and gets done CHEAP. At the end of the day, companies will be stupid not to source some of their manufacturing from the largest single workforce in the world. Heck, I'll bet if you dig deeper, you'll probably find that over 50% of the parts in your BWM probably came from China one way or another, since the majority of the suppliers BMW deal with, be it Bosch or ZF or any of the tier 1, tier 2 or tier 3 suppliers, ALL get their stuff manufactured there. Maybe they do the assembly in Germany or United States, and by the time it gets to the next step, in the supply chain, nobody will be the wiser. That, and anyone here that thinks stuff made in China is inferior? Think again. Cheap sh*t made in China is inferior. Expensive stuff made in China? They're probably BETTER made than the most skilled labor can produce here in the U.S. or even in Europe. High-end skill labor in China is BETTER than high-end skilled labor you can find anywhere. The problem with the high-end stuff for import? You can't afford to make enough to drive the cost of logistics down. Especially say, for a product that cost $100 to make? You're not importing multiple container-full of it and tying up 8, or 9 figure in cash for the inventory to make the per-unit cost reasonable for import. Where it makes sense, is if you're importing $100,000 worth of springs and sprockets and stuff that comes in several huge containers, that you ultimately assemble here yourself into thousands of units. Like I said. If any of you wants to dig deeper, you'd be SHOCKED at how much of your BMW comes from China. SHOCKED.
__________________
Sitting on a beat-up office chair in front of a 5 year old computer in a basement floor, sipping on stale coffee watching a bunch of meaningless numbers scrolling aimlessly on a dimly lit 19” monitor.
|
Appreciate
1
lab_rat394.50 |
01-04-2013, 07:31 PM | #81 |
AC
95
Rep 2,387
Posts |
what kind of world do you people live in?
it is almost impossible not to find anything made in China (Vietnam, Thailand, or other SEA countries ...) now?!? on the odd occasions you find items made in Italy, France, or Japan, you will be paying at least 4 times as much (if not more).
__________________
Your Supreme Leader
|
Appreciate
1
|
01-05-2013, 06:57 AM | #82 |
Captain
46
Rep 730
Posts |
Mine are made in china. Had them for awhile and love them. Funny thing is i paid $235 for the rotors and pads and some vendors sell them for $500. Almost everything is outsourced now days. OP put your rotors on and you will like them come back and tell us how much you like your Chinese product |
Appreciate
0
|
01-09-2013, 12:34 PM | #83 | |
SW20 to BL to E92
35
Rep 179
Posts |
Quote:
I was specifically referring to when BMW builds all their cars in China with the joint venture they have with Brilliance...I actually got a call about a job offer in a factory there but turned it down for gf reasons... |
|
Appreciate
0
|
01-09-2013, 02:11 PM | #84 |
Lieutenant General
2286
Rep 12,565
Posts
Drives: Z4 M, X5, GX460
Join Date: Apr 2008
Location: CT
iTrader: (99)
Garage List F15 X5 xDrive35i [8.75]
E86 Z4 M [10.00] F10 550i (Retired) [9.17] F25 X3 xDrive35i (R ... [9.43] E82 135is (Retired) [9.50] E85 Z4 M (Retired) [9.41] E90 328i xDrive (Re ... [9.25] E86 Z4 3.0si (Retired) [9.24] |
I've worked with ECS over the last 8 years from my VW days till now. And to be honest, they are great for sourcing oem parts but that's pretty much it. All their in-house products & kits aren't that great, ie their oil drain plug among others. Stick to oe or reputable brands like Stoptech, Brembo, etc.
|
Appreciate
0
|
01-09-2013, 02:43 PM | #85 |
Lieutenant Colonel
104
Rep 1,529
Posts |
again i have the ecs slotted rotors that have that "special" coating on them and mine still are not rusting and i have had them on for like 6 monhts now. to me they are quality parts...no warping either and i have done a couple hard track days.
__________________
Space Gray l 6MT l OSG LSD w/ VAC Race Diff Cover l Cobb e30 l Morr vs8.2 l UUC SSK w/ DSSR l VSRF Catless Dps l RPI Intercooler l CDV Removed l HID AE 8000k l ETS Catback l AST 5200 w/ Vorshlag Camber Plates l ER Dual Oil Coolers l Rear Camber and Toe Arms l K&N Drop In l Solid Tranny/Diff/Subframe Bushings l Bridgestone RE-11
|
Appreciate
0
|
01-11-2013, 04:57 PM | #86 |
Enlisted Member
0
Rep 44
Posts |
I agree jus cuz a product is from china doesnt mean its garbage. As a matter of fact I recently purchased a ignition coilover for my older 02 3 series. And the product was actually made in china. And this was a offical bmw autobahn dealer!!! Since I paid 100$ for it figured it was legit but I guess eveything now adays is from china.
|
Appreciate
0
|
01-22-2013, 01:51 PM | #87 |
Colonel
149
Rep 2,120
Posts |
So were these installed? If so how do you like them so far? I want these, just curious how they are holding up
__________________
BMW CCA # 473001
|
Appreciate
0
|
01-22-2013, 03:22 PM | #88 | |
Major General
81
Rep 6,092
Posts |
Quote:
__________________
|
|
Appreciate
0
|
Bookmarks |
Tags |
bbk, china, drilled, ecs, rotors |
|
|