FS: Arc-8 18X10 ET25 Satin Black

[drenge]

BIMMERPOST / Classifieds

Asking Price:

USD 800.00

Or Best Offer

Location:

✓ Will Ship

Item Interest

Selling 4 APEX ARC-8 SATIN BLACK 18X10 track wheels. There are no cracks and just very light scuffs (will send higher res pics). The wheels will balance but due to track use the computer will show very slight bend. Excellent condition!

Will ship at buyers expense.

Just sold my car and may be listing tires as well!

(will include a free extra wheel that was scuffed - for a total of 5 wheels)

[sterile stork]

Are these any shorter in the overall height than the OE top hats?

[drenge]

I assume they are but you may want to refer to the site for more information.

ONLY fits E90/92 M3 with 16mm pin and stock spring diameter, for regular e9x select (Seperate item, CPe9xTouring).

These plates feature over 26mm of total camber adjustment with the ability to make corrective caster changes to equalize side-to-side caster in the stock position.

Other features include replaceable waterproof German axial load bearings, and urethane bushings for long life, less deflection, and a smooth silent ride on stock or stock sized aftermarket springs.

Our camber plates are also engraved with the Ground Control logo and markings which can be used to locate the plate in the stock position for easy, repeatable, adjustment from street to track and back.

All components are anodized or zinc plated for corrosion resistance.

We also offer our lifetime guaranty! (Bearings not included)

• A clean sheet design for street cars, not an adapted spherical race plate.
• Waterproof, German-made, axial load steering bearings.
• Allows for up to 26mm total camber adjustment.
• Unique slot design allows for caster correction.
• Urethane center mounts reduce NVH, yet do not flex.
• All components plated or anodized for corrosion resistance.
• Zinc plated mounting bracket for ease of install and adjustment.
• Reuses stock rubber spring pad for noise isolation.

Torque camber plate mounting nuts to 18ft/lbs using properly calibrated torque wrench. DO NOT USE PNEUMATIC TOOLS

[M3ANMACHINE]

These should fit Dinan Suspension, right?

[drenge]

Yes, according to the tech at Ground Control, this will absolutely fit the Dinan suspension.

[M3ANMACHINE]

Originally Posted by drenge

Yes, according to the tech at Ground Control, this will absolutely fit the Dinan suspension.

Thanks. Any idea of a ballpark figure for the mileage on them?

[drenge]

Originally Posted by M3ANMACHINE

Thanks. Any idea of a ballpark figure for the mileage on them?

I never installed the plates on my 2012 M3 but the guy I bought them from indicated that he had them on for 1 season (summer). Not sure how many miles that equated to but it shouldn't be a lot.

[admranger]

I assume everything works smoothly.

If so, please read my PM.