Sponsored by The Tire Rack

[parkjake50]

245/35-19 and 265/35-19 currently on the wheels,
I'm planning on running 255/35 and 275/35 PS4S on the back.
However, I am running 12mm spacers all around and wondering if I will rub.
I looked into the fitment sticky but doesn't seem to show ZCP/12mm/PS4S combos.
I'd appreciate some input.
Thanks in advance

[shimmy23]

Originally Posted by parkjake50

245/35-19 and 265/35-19 currently on the wheels,
I'm planning on running 255/35 and 275/35 PS4S on the back.
However, I am running 12mm spacers all around and wondering if I will rub.
I looked into the fitment sticky but doesn't seem to show ZCP/12mm/PS4S combos.
I'd appreciate some input.
Thanks in advance

stock height no. lowered maybe

[parkjake50]

Originally Posted by shimmy23

stock height no. lowered maybe

I'm on ZCP suspension so a little lower. Would this make it rub?

[nycplumber]

You won't have any actual issues but it will likely rub when you're close to full lock in the front. Typical of 255/35/19 in front

[tdott]

Rear with 12mm and 275/35 will rub on the bumper tab on big dips.
It will self clear eventually.

15mm/12mm is the most common setup.

[wyatth]

You might not rub, but that's awfully aggressive in the rear. I have 255/275 PS4s on a ZCP with 10/5 spacers and it's close to flush. 10mm rear would be as aggressive as I'd want, 12s might poke. I'm happy with 10/5s. Plenty of photos in my thread in the Photo subforum.

[parkjake50]

Originally Posted by wyatth

You might not rub, but that's awfully aggressive in the rear. I have 255/275 PS4s on a ZCP with 10/5 spacers and it's close to flush. 10mm rear would be as aggressive as I'd want, 12s might poke. I'm happy with 10/5s. Plenty of photos in my thread in the Photo subforum.

Perhaps I should look into 10/5 spacers and get 255/275 fitment. I love the square looking sidewall look. However, I drive 2-3k miles a year so itll take me awhile before purchasing I suppose.