SZL Clock Spring Alignment

OneOneSix · 01-10-2023, 04:42 PM

Hi All,

I'm replacing a SZL/clock spring assembly and, looking at the plastic moulding, I'm guessing there should be a mark/dot visible in the small window when it's at the correct (straight ahead) angle.

Can anyone please confirm that the attached image is correct? I have no prior experience of these! Thanks.

anom3 · 01-11-2023, 10:34 AM

hi.

i have done this before. yes you should see a yellow (at least in my case) dot when it's at the correct position.

01-10-2023, 04:42 PM	#1
OneOneSix New Member 3 Rep 23 Posts Drives: BMW M140i Shadow Edition Join Date: Jul 2012 Location: UK iTrader: (0)	SZL Clock Spring Alignment Hi All, I'm replacing a SZL/clock spring assembly and, looking at the plastic moulding, I'm guessing there should be a mark/dot visible in the small window when it's at the correct (straight ahead) angle. Can anyone please confirm that the attached image is correct? I have no prior experience of these! Thanks. Attached Images
	Appreciate 0 Tweet Quote

01-11-2023, 10:34 AM	#2
anom3 Captain 260 Rep 955 Posts Drives: F30 335ix Join Date: Apr 2014 Location: Behind the wheel iTrader: (0)	hi. i have done this before. yes you should see a yellow (at least in my case) dot when it's at the correct position.
	Appreciate 1 OneOneSix3.00 Quote