12-11-2014, 06:50 PM | #1 |
Second Lieutenant
18
Rep 286
Posts |
Wheels fitment
I have a 2013 335i with 19" and have seen some 18" 1 series wheels I like.
Size is as follows front 18x7.5" ET49 and rear 18x8.5" ET52 Will I have any issues fitting these. I have standard brakes |
12-12-2014, 11:33 AM | #2 |
Now in the dark side !
65
Rep 1,136
Posts |
Not sure but do think you'll need spacers.
Regular offset for F30 are +36F, +46R on 19" staggered setup. Nothing better than to test-fit them, if easily available.
__________________
Present: 2011 Porsche Carrera S Cab, white (Now on the dark side!)
BMW X3 M40i (wifey) Past:2012 335i Sport Black, 20" 356 wheels, M Sport Aero, MPE (Sold -kinda missed) 2010 X5 35d Black fully loaded (Sold) 2007 335i sedan Antracite (Sold and missed !) |
Appreciate
0
|
12-12-2014, 01:11 PM | #3 |
First Lieutenant
103
Rep 335
Posts |
Between the higher offset and narrower width, the outer edge of the front wheels would be 19mm inside the OEM setup. The rear would only pull in by 5mm.
|
Appreciate
0
|
12-12-2014, 03:28 PM | #4 |
Second Lieutenant
18
Rep 286
Posts |
Thanks for the help. I think I'll wait in that case for something a little more suitable. Don't really want to be messing around with spacers or have the geometry out by that much.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|