[shawnsheridan]

Originally Posted by Dacks

Hi! I need 52.1 PSdZData.
Could you send me the link to the data?
I-step of my F30 328i is F020-14-03-502, and I have E-SYS 3.23.4.

Thanks in advance.

Sorry, but no. You cannot send or receive PM's yet.

[amf]

Originally Posted by shawnsheridan

Make sure you are using the latest version of WinRAR.

If it still fails, then redownload.

shawn,

I downloaded winrar 5.0 and extracted again....same error. I am downloading
PSdZdata again.

Thanks,

[MarkG_M5Comp]

Hello all

I'm running V3.23.4 and PSDzData 51.3 Lite for my Sept '13 build.

I've offered to code for those with newer cars so assume I need the newer data - would someone be so kind as to send me a link for downloading the latest?

Many thanks

Mark

[shawnsheridan]

Originally Posted by MarkG335

Hello all

I'm running V3.23.4 and PSDzData 51.3 Lite for my Sept '13 build.

I've offered to code for those with newer cars so assume I need the newer data - would someone be so kind as to send me a link for downloading the latest?

Many thanks

Mark

PM sent.

[amf]

Originally Posted by shawnsheridan

Make sure you are using the latest version of WinRAR.

If it still fails, then redownload.

Thanks shawn for your help. I downloaded the full psdzdata and it worked. I just coded my car back to the way I had it before the dealer updated my software.

[shawnsheridan]

Originally Posted by amf

Thanks shawn for your help. I downloaded the full psdzdata and it worked. I just coded my car back to the way I had it before the dealer updated my software.

[Ossocao]

Did some coding today and was able to turn Wlan on. Computer and Iphone can see the car wifi, but I was unable to connect to it on both devices. Any tips?

Coding I did:

Enable Wifi:

HU_NBT > 3003 > WLAN_STATUS > aktiv
HU_NBT > 3003 > WLAN_MODUS > ap
HU_NBT > 3003 > WLAN_SIGNAL_STRENGTH > "incar" for low power, "outdoor" for high power
HU_NBT > 3000 > ENT_MC_WLAN_STREAM_DMP_COVERART > aktiv
HU_NBT > 3000 > ENT_MC_WLAN_STREAM_DMP_VIDEO > aktiv
HU_NBT > 3000 > ENT_MC_WLAN_STREAM_DMP > aktiv

I'm in 49.X.

[spoonflames]

hi shawn / all

I am running E-sys 3.22.5 with pzdata 49.4
I paid for a 1 year token, got some months left
what is my upgrade path for each, without needing a new token?

Your help is always appreciated
thanks

[shawnsheridan]

I replied to your PM.

[Mattt1]

I was trying to code EBT, I had made the 6NH and 6NS change and uploaded and was trying this step:

Click 'read' under vehicle order =>
click Read SVT =>
right click FA and select activate FA =>
Right Click on HU_CHAMP2 (HU_NBT for NBT Pro Media) (the ECU itself not the underlying CAFD) =>
Select CODE
Wait for 'Abarbeitung beendet' which means finished completed.

I had an error due to old pszd data, so have updated to the latest files (thanks Shawn) - do I need to repeat any previous steps or just go into it again and try the above final step?

Thanks

[shawnsheridan]

You do not need to change FA again if you have 6NS in your FA, but you do need to repeat the steps above.

[Mattt1]

Tried those steps with the new data and got the following:

14-04-06 16:26:23,276 [WARN] [CodingTask - vin:XXXXXXX - ecu:HU_NBT - da:0x63] com.bmw.psdz.uc.event.EventManagerImpl: There was an error during TAL execution, please check the log files. [ParallelTask-6]
negative response error:
code: TIMEOUT P2/T2 occurred
description: P2 timeout on Service RDBI_SVK has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; ECU: HU_NBT_63_ETHERNET
severity: ERROR

Timestamp: Sun Apr 06 16:26:23 BST 2014
ErrorCategory: SYSTEM_ERROR ID: 2130765072
Class: com.bmw.psdz.vehicle.connection.util.ResultUtil
ExecutionContext={category=VEHICLE, ecuid=(HU_NBT,0x63), TALLINE_ID=1,PSdZEvent={message=MCDDiagService<id= 46900, job=com.bmw.psdz.jobs.programming.zgw.MCD3_GetSVKf romECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=Physical request to ECU with address 0x63>, timestamp=Sun Apr 06 16:26:19 BST 2014, package name=com.bmw.prodias.execution.primitives.mcd, class name=SingleEcuJob, text id=MCD_EVENT_ID__JOB__SERVICE__DESCRIPTION__LINK__ , event id=default, event type=DiagService error, null},PSdZEvent={message=MCDDiagService<id=46900, job=com.bmw.psdz.jobs.programming.zgw.MCD3_GetSVKf romECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=Physical request to ECU with address 0x63>, timestamp=Sun Apr 06 16:26:21 BST 2014, package name=com.bmw.prodias.execution.primitives.mcd, class name=SingleEcuJob, text id=MCD_EVENT_ID__JOB__SERVICE__DESCRIPTION__LINK__ , event id=default, event type=DiagService error, null},PSdZEvent={message=MCDDiagService<id=46900, job=com.bmw.psdz.jobs.programming.zgw.MCD3_GetSVKf romECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=Physical request to ECU with address 0x63>, timestamp=Sun Apr 06 16:26:23 BST 2014, package name=com.bmw.prodias.execution.primitives.mcd, class name=SingleEcuJob, text id=MCD_EVENT_ID__JOB__SERVICE__DESCRIPTION__LINK__ , event id=default, event type=DiagService error, null}}MCD Error Code: 0xe510MCD Error Code Description: resource not availableVendor Code: 0x85eVendor Code Description: P2 timeout occured
at com.bmw.psdz.vehicle.connection.util.ResultUtil.ch eckResponsePositive(ResultUtil.java:215)
at com.bmw.psdz.vehicle.connection.util.ResultUtil.ge tPositiveResponseOrTerminateOnError(ResultUtil.jav a:175)
at com.bmw.psdz.vehicle.connection.wrapper.LegacyJobW rapper.terminateOnError(LegacyJobWrapper.java:520)
at com.bmw.psdz.vehicle.configuration.jobs.VehicleCon figurationJobs.requestSVKfromECU(VehicleConfigurat ionJobs.java:102)
at com.bmw.psdz.vehicle.configuration.jobs.VehicleCon figurationJobs.requestSVKfromECU(VehicleConfigurat ionJobs.java:52)
at com.bmw.psdz.talexecutor.data.TaskApiImpl.requestS VKfromECU(TaskApiImpl.java:182)
at com.bmw.psdz.tasks.base.SingleEcuTask$ReadSvk.doEx ecute(SingleEcuTask.java:1013)
at com.bmw.psdz.tasks.base.TaskStep.execute(TaskStep. java:40)
at com.bmw.psdz.tasks.base.SingleEcuTask.execute(Sing leEcuTask.java:257)
at com.bmw.psdz.tasks.base.scheduler.RunnableTask.run (RunnableTask.java:109)
at java.util.concurrent.ThreadPoolExecutor$Worker.run Task(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run (Unknown Source)
at java.lang.Thread.run(Unknown Source)
14-04-06 16:26:23,277 [INFO] [CodingTask - vin:XXXXXXXX - ecu:HU_NBT - da:0x63] com.bmw.psdz.uc.event.EventManagerImpl: API: firePSdZEvent(PSdZEvent pEvent) finished [ParallelTask-6]
14-04-06 16:26:23,278 [INFO] [CodingTask - vin:XXXXXXXX - ecu:HU_NBT - da:0x63] com.bmw.prodias.execution.DefaultJobProcessor: logical link HU_NBT_63_ETHERNET is not cleanly removable, but will remove (and reset) it anyway [ParallelTask-6]
14-04-06 16:26:23,278 [WARN] [CodingTask - vin:XXXXXXXX - ecu:HU_NBT - da:0x63] com.bmw.psdz.tasks.base.scheduler.RunnableTask: Task CodingTask/CodingTask: ecu:HU_NBT - da:0x63, mExecutionTimes=TaskExecutionTimes [mEstimatedExecutionTime=-1, mPlannedStartTime=1396797976960, mPlannedEndTime=1396797989960, mActualStartTime=1396797976961, mActualEndTime=1396797983278], resourcesAcquired=true] finished with TaskReturnCode "failed" [ParallelTask-6]
14-04-06 16:26:23,281 [WARN] [CodingTask - vin:XXXXXXXX - ecu:HU_NBT - da:0x63] com.bmw.psdz.api.internal.ExceptionHandler: the following exceptions occured during task execution: [ParallelTask-6]
14-04-06 16:26:23,282 [INFO] [CodingTask - vin:XXXXXXXX - ecu:HU_NBT - da:0x63] com.bmw.psdz.uc.event.EventManagerImpl: API: firePSdZException(PSdZRuntimeException pException) started [ParallelTask-6]
14-04-06 16:26:23,290 [INFO] [CodingTask - vin:XXXXXXXXX - ecu:HU_NBT - da:0x63] com.bmw.psdz.system.configuration.languagemapper.L anguageMapperImpl: No instance of psdzcodes_languagemapping.xml found in classpath, falling back to the default file. [ParallelTask-6]
14-04-06 16:26:23,307 [WARN] [CodingTask - vin:XXXXXXX - ecu:HU_NBT - da:0x63] com.bmw.esys.commons.exception.EsysExceptionHandle r: PSdZ Error -- Exception in executeAsync. [C046] --- [Ljava.lang.String;1819c67 [ParallelTask-6]
com.bmw.esys.domain.psdz.PsdzException: Exception in executeAsync. [C046]
at com.bmw.esys.domain.tal.ProgrammingControl$Excepti onListener.onException(ProgrammingControl.java:106 0)
at com.bmw.psdz.uc.event.RegisteredExceptionListener. onException(RegisteredExceptionListener.java:36)
at com.bmw.psdz.uc.event.ExternalSynchronizedHandler. handleException(ExternalSynchronizedHandler.java:7 6)
at com.bmw.psdz.uc.event.EventManagerImpl.firePSdZExc eption(EventManagerImpl.java:111)
at com.bmw.psdz.api.internal.ExceptionHandler.handleT askExceptions(ExceptionHandler.java:83)
at com.bmw.psdz.api.internal.ExceptionHandler.handleT askExceptions(ExceptionHandler.java:50)
at com.bmw.psdz.tasks.base.scheduler.Scheduler.handle Exceptions(Scheduler.java:242)
at com.bmw.psdz.tasks.base.scheduler.Scheduler.signal TaskFailed(Scheduler.java:215)
at com.bmw.psdz.tasks.base.scheduler.RunnableTask.sig nalEndOfTaskExecution(RunnableTask.java:270)
at com.bmw.psdz.tasks.base.scheduler.RunnableTask.run (RunnableTask.java:140)
at java.util.concurrent.ThreadPoolExecutor$Worker.run Task(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run (Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: negative response error:
code: TIMEOUT P2/T2 occurred
description: P2 timeout on Service RDBI_SVK has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; ECU: HU_NBT_63_ETHERNET
severity: ERROR

Timestamp: Sun Apr 06 16:26:23 BST 2014
SessionId: default
ErrorCategory: SYSTEM_ERROR ID: 2130765072
Class: com.bmw.psdz.vehicle.connection.util.ResultUtil
ExecutionContext={category=VEHICLE, ecuid=(HU_NBT,0x63), TALLINE_ID=1,PSdZEvent={message=MCDDiagService<id= 46900, job=com.bmw.psdz.jobs.programming.zgw.MCD3_GetSVKf romECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=Physical request to ECU with address 0x63>, timestamp=Sun Apr 06 16:26:19 BST 2014, package name=com.bmw.prodias.execution.primitives.mcd, class name=SingleEcuJob, text id=MCD_EVENT_ID__JOB__SERVICE__DESCRIPTION__LINK__ , event id=default, event type=DiagService error, null},PSdZEvent={message=MCDDiagService<id=46900, job=com.bmw.psdz.jobs.programming.zgw.MCD3_GetSVKf romECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=Physical request to ECU with address 0x63>, timestamp=Sun Apr 06 16:26:21 BST 2014, package name=com.bmw.prodias.execution.primitives.mcd, class name=SingleEcuJob, text id=MCD_EVENT_ID__JOB__SERVICE__DESCRIPTION__LINK__ , event id=default, event type=DiagService error, null},PSdZEvent={message=MCDDiagService<id=46900, job=com.bmw.psdz.jobs.programming.zgw.MCD3_GetSVKf romECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=Physical request to ECU with address 0x63>, timestamp=Sun Apr 06 16:26:23 BST 2014, package name=com.bmw.prodias.execution.primitives.mcd, class name=SingleEcuJob, text id=MCD_EVENT_ID__JOB__SERVICE__DESCRIPTION__LINK__ , event id=default, event type=DiagService error, null}}MCD Error Code: 0xe510MCD Error Code Description: resource not availableVendor Code: 0x85eVendor Code Description: P2 timeout occured
at com.bmw.psdz.vehicle.connection.util.ResultUtil.ch eckResponsePositive(ResultUtil.java:215)
at com.bmw.psdz.vehicle.connection.util.ResultUtil.ge tPositiveResponseOrTerminateOnError(ResultUtil.jav a:175)
at com.bmw.psdz.vehicle.connection.wrapper.LegacyJobW rapper.terminateOnError(LegacyJobWrapper.java:520)
at com.bmw.psdz.vehicle.configuration.jobs.VehicleCon figurationJobs.requestSVKfromECU(VehicleConfigurat ionJobs.java:102)
at com.bmw.psdz.vehicle.configuration.jobs.VehicleCon figurationJobs.requestSVKfromECU(VehicleConfigurat ionJobs.java:52)
at com.bmw.psdz.talexecutor.data.TaskApiImpl.requestS VKfromECU(TaskApiImpl.java:182)
at com.bmw.psdz.tasks.base.SingleEcuTask$ReadSvk.doEx ecute(SingleEcuTask.java:1013)
at com.bmw.psdz.tasks.base.TaskStep.execute(TaskStep. java:40)
at com.bmw.psdz.tasks.base.SingleEcuTask.execute(Sing leEcuTask.java:257)
at com.bmw.psdz.tasks.base.scheduler.RunnableTask.run (RunnableTask.java:109)
... 3 more

[shawnsheridan]

What is your car's build date?

[Hogan]

Successfully coded!

-sport +
-sport automatic
-no disclaimer
-no seat belt
-digital speed
-no auto start stop
-torque/hp

Sport Auto is awesome!
could not find launch control.

[Mattt1]

Originally Posted by shawnsheridan

What is your car's build date?

Week 10 2014

[tsv81]

Hi,

Apparently on an e90 with base audio, you can recode the headunit to output a low level signal so that you can install an amp and connect directly to the inputs on it. Is there a way to do this for an f30? I've searched but can't find a diy. If so, can someone post step by step instructions please?

Thanks!

[top6491]

Is the most recent F10 cheatsheet v3? Not a lot on there for 2012 model year. Thanks. Simply looking for additional codes since I coded a year ago. CThanks...

[shawnsheridan]

Yes, v.3 is the last one I published. A 2012 is basically the same as 2011 though, so you would not see unique 2012 codes, and there simply hasn't been much of anything more to add for these cars. I do need to update it for 2013 / 2014 NBT cars though.

[shawnsheridan]

Originally Posted by Mattt1

Week 10 2014

I take it your are VO Coding when you get his error. Are you able to read ECU's and FDL Code them?

[Mattt1]

Yes I'm trying to enable EBT, I've not tried anything else at the moment due to the errors!

[Parkaboy]

Originally Posted by Ossocao

Did some coding today and was able to turn Wlan on. Computer and Iphone can see the car wifi, but I was unable to connect to it on both devices. Any tips?

Coding I did:

Enable Wifi:

HU_NBT > 3003 > WLAN_STATUS > aktiv
HU_NBT > 3003 > WLAN_MODUS > ap
HU_NBT > 3003 > WLAN_SIGNAL_STRENGTH > "incar" for low power, "outdoor" for high power
HU_NBT > 3000 > ENT_MC_WLAN_STREAM_DMP_COVERART > aktiv
HU_NBT > 3000 > ENT_MC_WLAN_STREAM_DMP_VIDEO > aktiv
HU_NBT > 3000 > ENT_MC_WLAN_STREAM_DMP > aktiv

I'm in 49.X.

You need specific hardware on the car or you just need the combox installed?

[shawnsheridan]

Originally Posted by Mattt1

Yes I'm trying to enable EBT, I've not tried anything else at the moment due to the errors!

Try doing basic FDL Coding first and see if that works.