Bastuck question

Cyruz · 09-07-2009, 01:17 PM

hey all, for anyone with the bastuck exhaust, i have a quick question. I have had mine for about 3 months now and love it. i was just reading another thread about the BB exhaust and noticed something.

on the stock exhaust there was a valve with a feed line on the left rear axle back section. i noticed the BB had one as well. the Bastuck didnt come with one. what did you all do with the valve and or the tubing. does not hooking up pr closing off the tubing have an negative effects?

enrita · 09-07-2009, 01:39 PM

doesnt do anything bad. you get a code Fume-flap something but its nothing to worry about. you can plug the little hose if you want.

Poderes1 · 09-07-2009, 09:53 PM

its no big deal

Bomis · 09-08-2009, 02:30 AM

just plug the hose...

marconi118 · 09-08-2009, 02:36 AM

close the hose with a plug to prevent dust to ender, it is a vacuum hose, so it will attract all the dirty around and it will go in the vacuum pump

09-07-2009, 01:17 PM	#1
Cyruz Captain 84 Rep 619 Posts Drives: Montego Blue 335i Join Date: Nov 2006 Location: NY iTrader: (0) Garage List 2007 335i [0.00] 2007 335i [0.00]	Bastuck question hey all, for anyone with the bastuck exhaust, i have a quick question. I have had mine for about 3 months now and love it. i was just reading another thread about the BB exhaust and noticed something. on the stock exhaust there was a valve with a feed line on the left rear axle back section. i noticed the BB had one as well. the Bastuck didnt come with one. what did you all do with the valve and or the tubing. does not hooking up pr closing off the tubing have an negative effects? __________________ Living on the fringe of lunacy my zenfolio photo gallery
	Appreciate 0 Tweet Quote

09-07-2009, 01:39 PM	#2
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	doesnt do anything bad. you get a code Fume-flap something but its nothing to worry about. you can plug the little hose if you want. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

09-07-2009, 09:53 PM	#3
Poderes1 Lieutenant 25 Rep 501 Posts Drives: 2008 E92 335i Join Date: Apr 2006 Location: PSL, Florida iTrader: (1) Garage List 2008 BMW 335i [0.00] 2006 BMW 325xi [0.00]	its no big deal __________________ 08 E92 335 i AW/CR, Alum Trim, Prem & Sport Pkgs, Step w/Paddles, Nav, 3M 20% tint all around, Passport 9500i radar, JB3 v2.0 with USB, Matte Black Grills, RPI Ram Air Scoops, OSS Full Blackout Angels V2, LED Turnsignals and sidemarkers, Helix V2 Stepped Front Mount Intercooler, Bastuck Quad Exhaust, Custom rear valence, Forged 1 Eight Deep Concaves Coral Red/Matte Black centers and Gloss Black Barrels 20x8.5f and 20x10.5r
	Appreciate 0 Quote

09-08-2009, 02:30 AM	#4
Bomis Captain 63 Rep 989 Posts Drives: BMW E92 M3 Join Date: Apr 2009 Location: Sweden iTrader: (1)	just plug the hose... __________________ EURO E92 M3 2008 6MT Interlagos ///*Fully Loaded!* Evolve-R ECU Flash/Gintani Sport Exhaust/MS Stg2 Intake Kit/H&R Springs/MS 18/15 mm spacers/Bmw Perf. Grills/Gloss Black side gills/LCI Tails/LUX V3's/RD license plate leds
	Appreciate 0 Quote

09-08-2009, 02:36 AM	#5
marconi118 Major 94 Rep 1,184 Posts Drives: 06/07 e93 335i Join Date: Nov 2008 Location: europe iTrader: (0)	close the hose with a plug to prevent dust to ender, it is a vacuum hose, so it will attract all the dirty around and it will go in the vacuum pump
	Appreciate 0 Quote