OEM 359M 9J Square-setup on E90/E91?

braziers · 02-21-2024, 07:55 AM

Is anyone running, or has run, the above square-setup (OEM 359M wheels, 19x9J +31 front and rear) on an E90 or E91?

Thinking of going down this route for my E91, rather than trying to squeeze the staggered setup (with the 10J rear) on the car and having to do arch mods or rolling to make it work.

Was thinking the square-setup in 9J could work, with either a 225/35 or 235/35 up front, and a 255/30 or 265/30 in the rear.

vester86 · 02-22-2024, 04:25 PM

why would you go staggered tyres on square rims? i know that it is possible but why would you?

mattanderson · 02-22-2024, 07:36 PM

With some negative camber, 245 or 255 shouldn't be a problem up front. That offset is perfect for a little front camber.

M-technik-3 · 02-22-2024, 09:29 PM

https://www.e90post.com/forums/showthread.php?t=1516086

the op mounted 359Ms

braziers · 02-23-2024, 02:38 AM

Quote:

Originally Posted by vester86

why would you go staggered tyres on square rims? i know that it is possible but why would you?

Maximise tyre width on the rear, while keeping the front tyres in check without rubbing up front.

braziers · 02-26-2024, 11:55 AM

Quote:

Originally Posted by M-technik-3

https://www.e90post.com/forums/showthread.php?t=1516086

the op mounted 359Ms

10 years ago I would have been all over this

, but I'm not sure about the coilover and stretched route these days.

225 on a 9j is within ETRTO limits, but 255 on a 10j is not, so I wouldn't want to go down the stretched out of spec route.

Having said that, it does look damn good.

02-21-2024, 07:55 AM	#1
braziers New Member 0 Rep 12 Posts Drives: 2015 F22 M235i, 2012 E91 335i Join Date: Jul 2019 Location: UK iTrader: (0)	OEM 359M 9J Square-setup on E90/E91? Is anyone running, or has run, the above square-setup (OEM 359M wheels, 19x9J +31 front and rear) on an E90 or E91? Thinking of going down this route for my E91, rather than trying to squeeze the staggered setup (with the 10J rear) on the car and having to do arch mods or rolling to make it work. Was thinking the square-setup in 9J could work, with either a 225/35 or 235/35 up front, and a 255/30 or 265/30 in the rear.
	Appreciate 0 Tweet Quote

02-22-2024, 04:25 PM	#2
vester86 Second Lieutenant 92 Rep 221 Posts Drives: BMW 330D '08 Join Date: Aug 2019 Location: Europe iTrader: (0)	why would you go staggered tyres on square rims? i know that it is possible but why would you?
	Appreciate 0 Quote

02-22-2024, 07:36 PM	#3
mattanderson Private First Class 192 Rep 156 Posts Drives: 2007 E92 328i Join Date: Mar 2023 Location: San Diego iTrader: (0)	With some negative camber, 245 or 255 shouldn't be a problem up front. That offset is perfect for a little front camber.
	Appreciate 0 Quote

02-22-2024, 09:29 PM	#4
M-technik-3 Major 2091 Rep 1,479 Posts Drives: E30 M3, E36 M3, 328iT, 335i Join Date: Mar 2020 Location: western Ma iTrader: (0) Garage List 1995 M3 [9.00] 2007 E91 [7.25] 1988 M3 [9.50]	https://www.e90post.com/forums/showthread.php?t=1516086 the op mounted 359Ms
	Appreciate 0 Quote