BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.

shawnsheridan · 08-16-2014, 05:33 PM

Quote:

Originally Posted by Moovrr

Can anyone advise regarding coding of EBT to a HU_CHAMP2 on a June 2014 F20 for another member?
The car has a Combox, Bus Nav and basic Bluetooth, and CMB_Media module. I have psdzdata 52.5, should this be updated?

You need to follow my exact instructions here:

http://f30.bimmerpost.com/forums/sho...65&postcount=9

You will only need updated PSdZData if you cannot read data from ECU.

Quote:

Originally Posted by Moovrr

I have read either 6NK or 6NS should work, these were added to the VO, with and without 6NH, and read back from the FA but no changes were apparent on the iDrive.

That is because you only changed FA, and did not do Step 2, VO Code Head Unit and standalone Combox (CMB_MEDIA) if present.

Quote:

Originally Posted by Moovrr

I then googled the CHAMP2 unit and came across some info that suggested that I needed to be able to FDL code FEM_GW, but this has no CAFD to edit so I assume the VO changes aren't taking effect on this FEM_GW module, is this correct?

I tried to "Detect CAF for SWE" but got the error shown below, and ideas?
...

Gateway module is not codeable. It is not supposed to have a CAFD, and you will never be able to inject a CAFD into it.

335i_4D · 08-16-2014, 10:30 PM

I asked on this thread before if someone tried this code on a MY2012:
EGS 3000 Applikation LC
- From nicht_aktiv to aktiv.

Finally went ahead and coded it.

If someone ever wonder, Launch Control is activable on a 2012 !

BMW_F30 · 08-16-2014, 10:38 PM

Is there a way to code KOMBI clock to lower right corner like MY15 cars?

Moovrr · 08-17-2014, 12:50 PM

Quote:

Originally Posted by shawnsheridan

You need to follow my exact instructions here:

http://f30.bimmerpost.com/forums/sho...65&postcount=9

You will only need updated PSdZData if you cannot read data from ECU.

That is because you only changed FA, and did not do Step 2, VO Code Head Unit and standalone Combox (CMB_MEDIA) if present.

Gateway module is not codeable. It is not supposed to have a CAFD, and you will never be able to inject a CAFD into it.

Thanks Shawn, as ever your advice is spot on and although I thought I had done as instructed I will try again. I noted I didn't get any feedback or progress bar so I must have missed something. Do you think 6NS or 6NK?

Thanks again

shawnsheridan · 08-17-2014, 12:52 PM

Quote:

Originally Posted by Moovrr

Thanks Shawn, as ever your advice is spot on and although I thought I had done as instructed I will try again. I noted I didn't get any feedback or progress bar so I must have missed something. Do you think 6NS or 6NK?

Thanks again

Use 6NS if FA build date is >= 0713. If it's older, I would use 6NK.

zarkoor · 08-17-2014, 01:53 PM

hi to all
I just got my Enet cable and want to start coding my F30 production date May 2014
could someone please advise the links I should be using to download Esys and Psdzdata
thanks in advance

shawnsheridan · 08-17-2014, 01:54 PM

Quote:

Originally Posted by zarkoor

hi to all
I just got my Enet cable and want to start coding my F30 production date May 2014
could someone please advise the links I should be using to download Esys and Psdzdata
thanks in advance

PM sent.

Moovrr · 08-17-2014, 02:15 PM

Quote:

Originally Posted by shawnsheridan

Use 6NS if FA build date is >= 0713. If it's older, I would use 6NK.

Yes it's a 2014 so 6NS then.

Quote:

Originally Posted by 335i_4D

I asked on this thread before if someone tried this code on a MY2012:
EGS 3000 Applikation LC
- From nicht_aktiv to aktiv.

Finally went ahead and coded it.

If someone ever wonder, Launch Control is activable on a 2012 !

mmm, I wonder if this will work on my 2013 F20 then which has the default setting nicht_aktiv and Werte=00. I have compared to a 2014 M135i and this has the setting Aktiv but with Werte=01, any thoughts what the Werte should be for my 125d?

bucawke · 08-17-2014, 09:13 PM

I can't find the f30 target selector when I'm getting ready to code my car.... it shows f10 f20 f56

shawnsheridan · 08-17-2014, 09:14 PM

Quote:

Originally Posted by buco702

I can't find the f30 target selector when I'm getting ready to code my car.... it shows f10 f20 f56

F30 uses F20 PSdZData, so F20 is your Target Connection.

bucawke · 08-17-2014, 09:15 PM

Quote:

Originally Posted by shawnsheridan

F30 uses F20 PSdZData, so F20 is your Target Connection.

ok i feel dumb now....

thanks shawn

PabloK · 08-17-2014, 09:25 PM

Has anybody coded the 2015 heated steering wheel notification yet (comes up in the main cluster)?

SBasinger · 08-17-2014, 10:50 PM

Quote:

Originally Posted by shawnsheridan

I need yours and SBasinger's KOMBI and FEM_BODY .ncd files to compare.

How would I got about getting that information for you?

shawnsheridan · 08-17-2014, 10:51 PM

Upload the files somewhere, and PM me the download links.

335i_4D · 08-18-2014, 11:21 AM

Quote:

Originally Posted by Moovrr

mmm, I wonder if this will work on my 2013 F20 then which has the default setting nicht_aktiv and Werte=00. I have compared to a 2014 M135i and this has the setting Aktiv but with Werte=01, any thoughts what the Werte should be for my 125d?

Haven't checked if the Werte changed, but in previous coding, only had to activate the function, the new value of Werte changed at the same time.

Crasherr · 08-18-2014, 12:12 PM

Please send me the ESYS, PSDZDATA, and token please

shawnsheridan · 08-18-2014, 12:18 PM

Quote:

Originally Posted by Crasherr

Please send me the ESYS, PSDZDATA, and token please

PM sent.

Toybota · 08-19-2014, 12:23 AM

Shawn, can I also get links for ESYS/PSDZDATA? Thanks in advance

shawnsheridan · 08-19-2014, 12:24 AM

Quote:

Originally Posted by Toybota

Shawn, can I also get links for ESYS/PSDZDATA? Thanks in advance

PM sent.

Diesel power · 08-19-2014, 12:36 PM

Can you send me the links also. Thanks so much

shawnsheridan · 08-19-2014, 12:43 PM

Quote:

Originally Posted by Diesel power

Can you send me the links also. Thanks so much

PM sent.

ramonE90-NL · 08-19-2014, 02:50 PM

Quote:

Originally Posted by 335i_4D

I asked on this thread before if someone tried this code on a MY2012:
EGS 3000 Applikation LC
- From nicht_aktiv to aktiv.

Finally went ahead and coded it.

If someone ever wonder, Launch Control is activable on a 2012 !

this also worked for me on my 2012!

tried LC yesterday, awsome!!

08-16-2014, 10:30 PM	#7108
335i_4D Now in the dark side ! 65 Rep 1,136 Posts Drives: 2011 911S 997.2 Cab Join Date: Feb 2010 Location: The Great North iTrader: (3)	I asked on this thread before if someone tried this code on a MY2012: EGS 3000 Applikation LC - From nicht_aktiv to aktiv. Finally went ahead and coded it. If someone ever wonder, Launch Control is activable on a 2012 ! __________________ Present: 2011 Porsche Carrera S Cab, white (Now on the dark side!) BMW X3 M40i (wifey) Past:2012 335i Sport Black, 20" 356 wheels, M Sport Aero, MPE (Sold -kinda missed) 2010 X5 35d Black fully loaded (Sold) 2007 335i sedan Antracite (Sold and missed !)
	Appreciate 0 Quote

08-16-2014, 10:38 PM	#7109
BMW_F30 Enlisted Member 57 Rep 42 Posts Drives: F30 2013 Join Date: Jul 2013 Location: USA iTrader: (0)	Is there a way to code KOMBI clock to lower right corner like MY15 cars?
	Appreciate 0 Quote

08-17-2014, 01:53 PM	#7112
zarkoor Registered 0 Rep 1 Posts Drives: F30, 328i Join Date: Jul 2014 Location: Egypt iTrader: (0)	hi to all I just got my Enet cable and want to start coding my F30 production date May 2014 could someone please advise the links I should be using to download Esys and Psdzdata thanks in advance
	Appreciate 0 Quote

08-17-2014, 09:13 PM	#7115
bucawke Private First Class 21 Rep 128 Posts Drives: 2015 BMW x5 Join Date: Jan 2014 Location: Las Vegas iTrader: (0) Garage List 2015 BMW x5 M-Sport [0.00]	I can't find the f30 target selector when I'm getting ready to code my car.... it shows f10 f20 f56
	Appreciate 0 Quote

08-17-2014, 09:25 PM	#7118
PabloK Lieutenant Colonel 597 Rep 1,805 Posts Drives: F30 Join Date: May 2013 Location: Orono iTrader: (1)	Has anybody coded the 2015 heated steering wheel notification yet (comes up in the main cluster)? __________________ 2014 F30 335i / 2014 F31 328d / 2014 F22 m235i 2019 G05 5.0 / 2012 E70 X5 50i / 2007 X5 3.0is 2011 e93 M3 / 2009 E60 M5 / 2004 E46 M3 2017 Alpina B6 22 Ram Trx / 22 M5 CS
	Appreciate 0 Quote

08-17-2014, 10:51 PM	#7120
shawnsheridan General 10445 Rep 40,789 Posts Drives: 2018 Alpina B6 650ix GC Join Date: Feb 2010 Location: Houston, TX iTrader: (0) Garage List 2018 F06 Alpina B6 ... [8.35]	Upload the files somewhere, and PM me the download links. __________________ 2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
	Appreciate 0 Quote

08-18-2014, 12:12 PM	#7122
Crasherr New Member 0 Rep 29 Posts Drives: 2018 F15, 2024 G80 Join Date: Oct 2012 Location: Germany iTrader: (0)	Please send me the ESYS, PSDZDATA, and token please
	Appreciate 0 Quote

08-19-2014, 12:23 AM	#7124
Toybota Enlisted Member 9 Rep 44 Posts Drives: 2013 335xi 6MT M Sport Join Date: Aug 2014 Location: NYC iTrader: (0)	Shawn, can I also get links for ESYS/PSDZDATA? Thanks in advance
	Appreciate 0 Quote

08-19-2014, 12:36 PM	#7126
Diesel power Second Lieutenant 130 Rep 248 Posts Drives: 24 Q8 E-Tron 24 M3 CX Join Date: Aug 2014 Location: LI, NY iTrader: (0)	Can you send me the links also. Thanks so much
	Appreciate 0 Quote