|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
E92 LCI CF Splitter For NON MTECH BUMPERS
|
|
08-08-2014, 01:04 PM | #1 |
Private
1
Rep 59
Posts |
E92 LCI CF Splitter For NON MTECH BUMPERS
I have a pair of carbon fiber splitters from my 2011 e92 LCI with non mtech bumpers in good condition. It was installed on my car for less than a month. Selling because i will be trading in my car soon. Asking $120 for the splitters The fitment is not perfect as in "plug and play". You will have to "fiddle" around to get a perfect fit; using clamps or better yet have it professionally installed. I was able to install it on mine without spaces or bowing just by using double sided tape, clamps and using the existing splash guard screws already on the car. It was kind of a PITA installing it myself but then again, im pretty anal.... I've drilled some holes on the splitters; clearance holes so i can use the existing screws on the car for mounting and 3 smaller holes to vent/drain any moisture/water. I've also sanded areas on the inside (as you can tell on the picture) to try to get a better fitment...This will come with double sided tape and glue which came with them when i bought these. I paid $250 for these off ebay... check out listing for more pictures... http://www.ebay.com/itm/CARBON-FIBER...1962fe&vxp=mtr Will ship anywhere in USA (north amer) for $20 Last edited by MM3; 08-08-2014 at 01:10 PM.. |
08-08-2014, 10:30 PM | #5 |
Private
1
Rep 59
Posts |
Sorry no I don't. I had one but I can't find them....
If u click on the ebay listing, they have pictures of them on the car... If I find the pictures I'll b sure to post them here... |
Appreciate
0
|
Bookmarks |
|
|