04-25-2024, 09:19 AM | #1 |
Enlisted Member
8
Rep 41
Posts |
2013 F30 335i rwd Suspension Upgrade advice
Hey all,
Looking to upgrade the suspension on my 90,000-mile rwd 2013 f30 335i This is what I've got so far in terms of parts I plan on buying, let me know what you guys think - https://www.fcpeuro.com/products/bmw...lus-35264552kt https://www.ecstuning.com/b-h-and-r-...s-set/28878-2/ https://burgertuning.com/products/f-...ant=6724574403 (1 set of 12mm and 1 set of 15mm for my stock 403m) https://www.turnermotorsport.com/p-341685-tms341685/ (Deleting EDC and am unable to tune due to factory warranty with engine replacement) Should I replace any more parts? I've seen some complete kits with Bilstein struts and H&R lowering spring kits and there seem to be a lot more parts to it than if I were to buy them separately. Example: https://shorturl.at/dIKM8 I know this kit is for an e9x but I'm assuming there are parts like these on an f30. Are there other things that I need to replace while the suspension is being redone, or would it be ok just to buy the parts individually and reuse things like the sealing grommet, shock absorber bracket, strut mount cap, etc.? Or am I just a dummy and all these parts come with the solo b8 kit that I linked? Any help is appreciated, Thank you all! Last edited by F30_Drew; 04-25-2024 at 09:26 AM.. |
04-25-2024, 10:43 AM | #2 |
Lieutenant
202
Rep 546
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|