|
|
10-13-2013, 11:01 AM | #1 |
New Member
2
Rep 25
Posts |
FS: Arc-8 18X10 ET25 Satin Black
Selling 4 APEX ARC-8 SATIN BLACK 18X10 track wheels. There are no cracks and just very light scuffs (will send higher res pics). The wheels will balance but due to track use the computer will show very slight bend. Excellent condition! Will ship at buyers expense. Just sold my car and may be listing tires as well! (will include a free extra wheel that was scuffed - for a total of 5 wheels) Last edited by drenge; 08-28-2014 at 04:09 PM.. Reason: new thread |
10-13-2013, 03:48 PM | #2 |
coupe la goon
373
Rep 1,644
Posts
Drives: green, black, white
Join Date: Jan 2006
Location: pdx
iTrader: (26)
Garage List 2011 BMW 1M Coupe [10.00]
2013 BMW M3 Coupe [10.00] 2010 BMW 535i xDriv ... [0.00] 2008 BMW M3 Coupe ( ... [0.00] |
Are these any shorter in the overall height than the OE top hats?
|
Appreciate
0
|
10-13-2013, 11:00 PM | #3 |
New Member
2
Rep 25
Posts |
I assume they are but you may want to refer to the site for more information.
ONLY fits E90/92 M3 with 16mm pin and stock spring diameter, for regular e9x select (Seperate item, CPe9xTouring). These plates feature over 26mm of total camber adjustment with the ability to make corrective caster changes to equalize side-to-side caster in the stock position. Other features include replaceable waterproof German axial load bearings, and urethane bushings for long life, less deflection, and a smooth silent ride on stock or stock sized aftermarket springs. Our camber plates are also engraved with the Ground Control logo and markings which can be used to locate the plate in the stock position for easy, repeatable, adjustment from street to track and back. All components are anodized or zinc plated for corrosion resistance. We also offer our lifetime guaranty! (Bearings not included) • A clean sheet design for street cars, not an adapted spherical race plate. • Waterproof, German-made, axial load steering bearings. • Allows for up to 26mm total camber adjustment. • Unique slot design allows for caster correction. • Urethane center mounts reduce NVH, yet do not flex. • All components plated or anodized for corrosion resistance. • Zinc plated mounting bracket for ease of install and adjustment. • Reuses stock rubber spring pad for noise isolation. Torque camber plate mounting nuts to 18ft/lbs using properly calibrated torque wrench. DO NOT USE PNEUMATIC TOOLS |
Appreciate
0
|
11-04-2013, 01:33 PM | #4 |
Admiral
933
Rep 3,886
Posts |
These should fit Dinan Suspension, right?
__________________
2020 FORD RAPTOR 2014 F15 X5 | M-SPORT SOLD 2011 SG E90 M3 | 2008 AW E90 M3 | 2004 E46 M3 |
Appreciate
0
|
11-04-2013, 08:14 PM | #6 |
Admiral
933
Rep 3,886
Posts |
Thanks. Any idea of a ballpark figure for the mileage on them?
__________________
2020 FORD RAPTOR 2014 F15 X5 | M-SPORT SOLD 2011 SG E90 M3 | 2008 AW E90 M3 | 2004 E46 M3 |
Appreciate
0
|
11-04-2013, 09:44 PM | #7 |
New Member
2
Rep 25
Posts |
|
Appreciate
0
|
11-04-2013, 10:08 PM | #8 |
Retired Curmudgeon
2985
Rep 4,049
Posts |
I assume everything works smoothly.
If so, please read my PM.
__________________
'19 X3 M40 Carbon Black/Oyster, '23 Jeep Grand Cherokee L Summit, Past BMWs: '18 M550i, '18 330 GT, '16 X5 40e, '11 E90M3, '06 X5 4.4, '03 330i ZHP, '02 M3, '97 Z3 2.8, '95 M3 (2x), '94 530i (manual), '92 525i (manual), '88 M3, '87 325iS |
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
camber plates, gc camber plates, ground control |
|
|