[Siki78]

Originally Posted by WagonHo

I'll add my voice to this request. Installed my F80 gauge cluster today. It was virginized and coded, and I have the BIMECU adapter. I don't get the tachometer in the HUD and the display in the lower part of the tach and lower center display in the cluster isn't showing modes, etc. Also, the Bimecu adapter is supposed to get the current gear displayed in the cluster, but I get an M1, C1, etc., *when the shift is made* but not persistently (reaching out to bimecu about this). These features are visible in Joweed's video at the top of this thread. The cluster is a HUD-ready F80 6WA, so I'm confident it's not the cluster itself.

Did my coder miss something?

All advice, tips, taunts, sympathis, etc., are welcome.

Look in kombi cafd what is writing for
GETRIEBE_ART
Depend what you have need to be written automatik or handschalter

[gsmith2455]

Originally Posted by joweed

Finally fitted a f80 cluster to my f30. All functions work 100% including gear, drive mode changes, m-hud and m shift lights. It's very easy to remove cluster only 2 t20 torx bits and 2 or 3 connectors depending if you have hud. The f80 cluster fits exactly the same as the f30 cluster.

Things you will need:
F80 cluster virginized (you will have a tamper dot if it's not virginized)
Gear adapter: this will convert the signal so it will display gears correctly, not needed for manual gearbox cars. I've used a bimmer ecu adapter but they don't ship outside of the US. I can help with getting a adapter for people outside of the US. You can also use XHP to show gears but it will be set out like a manual f80 on your cluster.
Enet cable for coding
Coding was done by https://instagram.com/bimmerretrola?igshid=YmMyMTA2M2Y=

I've uploaded a video to show the cluster working with all the features on YouTube.

https://youtube.com/shorts/brYTwbwYRWU?feature=share

How much in total did this all run you? very interested in doing this on mine!

[dogballs]

Reading and building posts - as you are..

[joweed]

Originally Posted by gsmith2455

How much in total did this all run you? very interested in doing this on mine!

It was about 350 usd for cluster, 300 for adapter, 150usd to virginze and coding can vary depending who you go with

[ssf556]

Would this work for a 2018 328d

[joweed]

Originally Posted by ssf556

Would this work for a 2018 328d

Yeah it should

[zaynn786]

Has anyone got any info on what the display looks like with an XHP flash? I’m interested in doing this mod as opposed to the 6WB, and if the XHP shows the gears as a manual but still retains P, N and R then more inclined to do the retrofit as I don’t need to fork out another £200 for the gearbox adapter