|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
JB3 For N55 Question
|
|
06-16-2012, 03:51 PM | #1 |
Private First Class
91
Rep 180
Posts |
JB3 For N55 Question
Hi all. My car is at the dealership getting serviced, and I am getting my driver side mirror replaced due to the fact that it squeaks incredibly loud when folding in or out. I am also getting the latest software update as part of the service. I was told my by SA that the side view mirror will need programming to install. I just bought a JB3 from a user on the forum, and was told that it was updated with the latest firmware. Should I be worried about installing the JB3 and having it conflict somehow with the latest BMW software or the programming that is done on the car for the mirror? Thanks
|
06-16-2012, 04:35 PM | #2 | |
Lieutenant Colonel
98
Rep 1,647
Posts |
Quote:
__________________
Current: 2021 X3MC
Past: 2013 bmw 335i, 2011 bmw 335i coupe, 2016 bmw m3 |
|
Appreciate
0
|
06-16-2012, 08:09 PM | #4 |
Major
74
Rep 1,035
Posts |
You can program with the JB3 installed. I would just leave it off however just to make sure there are no issues at all.
You can update firmware on the JB3 as well. But the JB4 is much much better. |
Appreciate
0
|
06-17-2012, 04:14 AM | #5 |
Private First Class
91
Rep 180
Posts |
don't really see much point in installing it and leaving it off...
|
Appreciate
0
|
06-17-2012, 06:47 AM | #6 |
Major
127
Rep 1,048
Posts |
I believe he means putting the JB3 in the stock mode while your car is being updated at the dealership.
I know what you are asking as far as the JB3 conflicting with the new software update from BMW and I would say probably not but it wouldn't hurt to double check with Terry at Burger Tuning. Dave Former car: 2007 335i JB3 |
Appreciate
0
|
06-17-2012, 07:53 AM | #7 | |
Major
74
Rep 1,035
Posts |
Quote:
Or set it to MAP 0 during programming. If its fails programming because of a piggback the dealer may charge you. Just trying to help out. |
|
Appreciate
0
|
06-17-2012, 03:31 PM | #8 |
Private First Class
91
Rep 180
Posts |
Thanks everybody. The tune is not installed on the car yet, I actually meant when I get the car back will I have any problems in terms of the latest firmware on the JB3 conflicting with the latest bmw software or any of the programming that is going to be done for the side view mirror? Thanks.
|
Appreciate
0
|
06-17-2012, 03:42 PM | #9 | |
Major
74
Rep 1,035
Posts |
Quote:
No, if you install it after they program the car you will have zero issues. One thing though, are you sure they are programming the car for replacing the mirror? The mirror is not a module and there shouldn't be a need to program the vehicle after replacement. |
|
Appreciate
0
|
06-17-2012, 04:53 PM | #10 |
Private First Class
91
Rep 180
Posts |
They are replacing the whole driver side mirror and said they needed to program it (whether or not my SA knows his stuff is another question) but the only thing I can see the programming needed for is the folding operations of the mirror?
|
Appreciate
0
|
Bookmarks |
Tags |
328, 335, bmw, e92, jb3 |
|
|